 |
ISSN:
1359-5997
Issue: Volume
38 , N° 276
Année:
2005 |
| Computational results of a model for chloride ingress in concrete including convection, drying-wetting cycles and carbonation | pp. 145 - 154 | |
| S. J. H. Meijers, J. M. J.M. Bijen, R. de Borst, A. L. A. Fraaij |
||
| Durability modelling of glass fibre reinforcement in cementitious environment | pp. 155 - 162 | |
| J. Orlowsky, M. Raupach, H. Cuypers, J. Wastiels |
||
| Effect of matrix modification on durability of glass fiber reinforced cement composites | pp. 163 - 171 | |
| A. Peled, J. Jones, S. P. Shah |
||
| Strength of shear connection in composite bridges with precast decks using high performance concrete and shear-keys | pp. 173 - 181 | |
| D. L. Araújo, M. K. El Debs |
||
| Flexural analysis and design of reinforced concrete beams with externally bonded FRP reinforcement | pp. 183 - 192 | |
| N. Pesic, K. Pilakoutas |
||
| Tension-stiffening model for FRP-strengthened concrete two-way slabs | pp. 193 - 200 | |
| U. A. Ebead, H. Marzouk |
||
| Correlations between the internal length, the fracture process zone and size effect in mortar and model materials | pp. 201 - 210 | |
| K. Haidar, G. Pijaudier-Cabot, J.-F. Dubé, A. Loukili |
||
| Experimental and analytical assessment of the behavior of stainless steel reinforced concrete beams | pp. 211 - 218 | |
| M. Geromel, O. Mazzarella |
||
| Finite-element modelling of concrete prisms reinforced with composite plates - Theory of cracking | pp. 219 - 227 | |
| S. Kesteloot, C. Djelal, S. Baraka, I. Benslimane |
||
| Low-volume wet-process sprayed concrete: pumping and spraying | pp. 229 - 237 | |
| S. A. Austin, C. I. Goodier, P. J. Robins |
||
| Rheological test methods for the characterization of extrudable cement-based materials - A review | pp. 239 - 247 | |
| R. Alfani, G. L. Guerrini |
||
| Failure mechanism of masonry prism loaded in axial compression: computational aspects | pp. 249 - 256 | |
| L. Berto, A. Saetta, R. Scotta, R. Vitaliani |
||
| Mechanical response of solid clay brickwork under eccentric loading. Part I: Unreinforced masonry | pp. 257 - 266 | |
| A. Brencich, L. Gambarotta |
||
| Mechanical response of solid clay brickwork under eccentric loading. Part II: CFRP reinforced masonry | pp. 267 - 273 | |
| A. Brencich, L. Gambarotta |
||
| Etude de poutres en bois lamellé-collé présentant des trous de réservation | pp. 275 - 282 | |
| P. Jodin |
||