Recommendations

Recommendations of RILEM TC177-MDT: Masonry Durability and on-site Testing MD.E.1 Determination of moisture distribution and level using radar in masonry built with regular units
by RILEM TC 177-MDT

Recommendation of RILEM TC-HTC 'Mechanical concrete properties at high temperature - Modelling and applications' Part 10: Restraint stress
by RILEM TC 200-HTC

RILEM TC 191-ARP 'Alkali-reactivity and prevention - Assessment, specification and diagnosis of alkali-reactivity' AAR-5: Rapid preliminary screening test for carbonate aggregates
by RILEM TC 191-ARP, H. Sommer, P. Nixon, I. Sims

Recommendation of RILEM TC 189-NEC "Non-destructive evaluation of the concrete cover": Comparative test - Part I: Comparative test of 'penetrability' methods
by RILEM TC 189-NEC, M. Romer

Recommendation of RILEM TC 189-NEC "Non-destructive evaluation of the concrete cover": Comparative test - Part II: Comparative test of "Covermeters"
by RILEM TC 189-NEC, L. Fernández Luco

Recommendation of RILEM TC 129-MHT 'Test methods for mechanical properties of concrete at high temperatures' Modulus of elasticity for service and accident conditions
by RILEM TC 129-MHT

Recommendations of RILEM TC-154-EMC: "Electrochemical techniques for measuring metallic corrosion" Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method
by RILEM TC-154-EMC, C. Andrade, C. ALONSO, J. Gulikers, R. B. Polder, R. Cigna, Ø. Vennesland, M. Salta

Recommendations of RILEM TC 167-COM: Characterization of old mortars Characterisation and damage analysis of old mortars
by RILEM TC 167-COM, R. P. J. Van Hees, L. Binda, I. Papayianni, E. Toumbakari

Test method recommendations of RILEM TC 177-MDT 'Masonry durability and on-site testing' - D.1: Indirect determination of the surface strength of unweathered hydraulic cement mortar by the drill energy method
by RILEM TC 177-MDT

Test method recommendations of RILEM TC 177-MDT 'Masonry durability and on-site testing' - D.3: Determination "in situ" of the adhesive strength of rendering and plastering mortars to their substrate
by RILEM TC 177-MDT

Test method recommendations of RILEM TC 177-MDT 'Masonry durability and on-site testing' - D.4: In-situ stress tests based on the flat jack
by RILEM TC 177-MDT

Test method recommendations of RILEM TC 177-MDT 'Masonry durability and on-site testing' - D.5: In-situ stress - strain behaviour tests based on the flat jack
by RILEM TC 177-MDT

Final Recommendation of RILEM TC 176-IDC 'Internal Damage of Concrete due to frost action' Test methods of frost resistance of concrete: CIF-Test: Capillary suction, internal damage and freeze thaw test) - Reference method and alternative methods A and B
by RILEM TC 176-IDC, M. J. Setzer, P. Heine, S. Kasparek, S. Palecki, R. Auberg, V. Feldrappe, E. Siebel

Final Recommendation of RILEM TC 176-IDC 'Internal Damage of Concrete due to frost action' Test methods of frost resistance of concrete: Slab test: Freeze/thaw resistance of concrete - Internal deterioration
by RILEM TC 176-IDC, L. Tang, P.-E. Petersson

Recommendation of RILEM TC 182-PEB on bending beam and rheometer measurements of bituminous binders
by RILEM TC 182 PEB, D. SYBILSKI, A. Vanelstraete, M. N. Partl

Recommendations of RILEM TC 154-EMC: Electrochemical techniques for measuring metallic corrosion Half-cell potential measurements - Potential mapping on reinforced concrete structures
by RILEM TC 154-EMC

Final recommendation of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete sigma-epsilon-design method
by RILEM TC 162-TDF

RILEM Recommended Test Method AAR-0 'Detection of potential alkali-reactivity in concrete' Outline guide to the use of RILEM methods in assessments of alkali-reactivity potential
by RILEM TC 191-ARP

RILEM Recommended Test Method AAR-1 'Detection of potential alkali-reactivity aggregates' Petrographic method
by RILEM TC 191-ARP

Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete Design of steel fibre reinforced concrete using the sigma-epsilon method: principles and applications
by RILEM TC 162-TDF

Recommendations of RILEM TC 178-TMC: 'Testing and modelling chloride penetration in concrete' Analysis of total chloride content in concrete
by RILEM TC 178-TMC

Recommendations of RILEM TC 178-TMC: 'Testing and modelling chloride penetration in concrete' Analysis of water soluble chloride content in concrete
by RILEM TC 178-TMC

Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: bending test
by RILEM TC 162-TDF

Recommendations of RILEM TC 127-MS: Tests for masonry materials and structures - MS.D3: Radar investigation of masonry - MS.D4: Measurement of local dynamic behaviour for masonry - MS.D8: Electrical conductivity investigation of masonry
by RILEM TC 127-MS

Recommendations of TC 176-IDC: Internal damage of concrete due to frost action CIF-Test: Capillary suction, internal damage and freeze thaw test) - Reference method and alternative methods A and B
by RILEM TC 176-IDC

Recommendations of TC 176-IDC: Internal damage of concrete due to frost action Slab test: Freeze/thaw resistance of concrete - Internal deterioration
by RILEM TC 176-IDC

Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete Uni-axial tension test for steel fibre reinforced concrete
by RILEM TC 162-TDF

Recommendations of RILEM TC 182-PEB 'Performance testing and evaluation of bituminous materials': Stiffness testing for bituminous materials
by RILEM TC 182-PEB

Recommendations of RILEM TC 167-COM: 'Characterization of old mortars' COM-C1 Assessment of mix proportions in historical mortars using quantitative optical microscopy
by RILEM TC 167-COM

Recommendations of RILEM TC 139-DBS: Durability of Building Sealants Durability test method - Determination of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants for high movement façade joints after exposure to artificial weathering
by RILEM TC 139-DBS

Recommendations of RILEM TC 154-EMC: Electrochemical techniques for measuring metallic corrosion Test methods for on site measurement of resistivity of concrete
by RILEM TC 154-EMC

Recommendations of RILEM TC 167-COM: Characterization of old mortars Quantitative analysis of historical mortars using optical microscopy
by RILEM TC 167-COM

Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete
by RILEM TC 162-TDF

Recommendations of RILEM TC 129-MHT: Test methods for mechanical properties of concrete at high temperatures. Part 8: Steady-state creep and creep recovery for service and accident conditions
by RILEM TC 129-MHT

Recommendations of RILEM TC 162-TDF: Sigma-epsilon design method
by RILEM TC 162-TDF

Recommendations of TC 129-MHT: Test methods for mechanical properties of concrete at high temperatures, Part 4: Tensile Strength for service and accident conditions
by RILEM TC 129-MHT

Recommendations of TC 129-MHT: Test methods for mechanical properties of concrete at high temperatures, Part 9: Shrinkage for service and accident conditions
by RILEM TC 129-MHT

Recommendations of RILEM TC 106-AAR: Alkali aggregate reaction A. TC 106-2 - Detection of potential alkali-reactivity of aggregates -The ultra-accelerated mortar-bar test B. TC 106-3 - Detection of potential alkali-reactivity of aggregates - Method for aggregate combinations using concrete prisms
by RILEM TC 106-AAR

Recommendations of TC 148-SSC: Strain Softening of Concrete - Test methods for compressive softening Test method for measurement of the strain-softening behaviour of concrete under uniaxial compression
by RILEM TC 148-SSC

Recommendation of TC 116-PCD: Tests for gas permeability of concrete - Preconditioning of concrete test specimens for the measurement of gas permeability and capillary absorption of water - Measurement of the gas permeability of concrete by the RILEM - CEMBUREAU method - Determination of the capillary absorption of water of hardened concrete
by RILEM TC 116-PCD

MS-A.1 - Determination of the resistance of wallettes against sulphates and chlorides MS-A.2 - Uni-directional salt crystallization test for masonry units MS-A.4 - Determination of the durability of hardened mortar MS-B.1 - Freeze/thaw test of masonry panels
by RILEM TC 127-MS

Un test d'humidification-séchage pou les blocs de terre comprimée et stabilisée au ciment
by RILEM TC 164-EBM

TC 129-MHT: TEST METHODS FOR MECHANICAL PROPERTIES OF CONCRETE AT HIGH TEMPERATURES, Recommendations: Part 7: Transient Creep for service and accident conditions
by RILEM TC 129-MHT

TC 127-MS: TESTS FOR MASONRY MATERIALS AND STRUCTURES Recommendations MS.A.6: Method for triaxial compression tests on mortar specimens taken from bed joints MS B.2: Measurement of shear strength of reinforcement in bed joints MS.B.3: Bond strength of
by RILEM TC 127-MS

TC 107-CSP: CREEP AND SHRINKAGE PREDICTION MODELS: PRINCIPLES OF THEIR FORMATION - Recommendation: Measurement of time-dependent strains of concrete
by RILEM TC 107-CSP

TC 127-MS: TESTS FOR MASONRY MATERIALS AND STRUCTURES - Recommendations: MS.A3. Unidirectional freeze-thaw test for masonry units and wallettes - MS.B5. Determination of the damage to wallettes caused by acid rain
by RILEM TC 127-MS

TC 129-MHT: Test methods for mechanical properties of concrete at high temperatrues. Recommandations: Part 6 - Thermal strain
by RILEM TC 129-MHT

TC 148-SSC: Test methods for the strain-softening response of concrete - Strain softening of concret in uniaxial tension
by RILEM TC 148-SSC

Recommendations of TC 127-MS: Tests for masonry materials
by RILEM TC 127-MS

Recommendations of TC 119-TCE: Avoidance of thermal cracking in concrete at early ages
by RILEM TC 119-TCE

Test Methods for strength tests on blocks of compressed earth / Mode opératoire pour la réalisation d'essais de résistance sur blocs de terre comprimée
by RILEM TC 164-EBM, M. Olivier, A. Mesbah, Z. El Gharbi, J.C. Morel

Recommendations of RILEM TC 127-MS: Tests for masonry materials and structures
by RILEM TC 127-MS

TC 117-FDC Recommendation - CDF test - test method for the freez thaw and deicing resistance of concrete - Tests with sodium chloride (CDF)
by RILEM TC 117-FDC

TC 107-GCS: Guidelines for the formulation of creep and shrinkage models - Addendum to Recommendations: Short form of creep and shrinkage predictin model B3 for structures of medium sensitivity
by RILEM TC 107-GCS

Draft recommendation for test method for the freeze-thaw resistance of concrete. Tests with water (CF) or with sodium chloride solution (CDF)
by RILEM

Draft recommendations for test methods for the freeze-thaw resistance of concrete - slab test and cube test
by RILEM TC 117-FDC

RILEM draft recommendation for determination of fracture energy in forward shear along the grain in wood
by RILEM TC 133-TF

Draft recommendation for repair strategies for concrete structures damaged by reinforcement corrosion
by RILEM TC 124-SRC

Draft recommendation for in situ concrete strength determination by combined non-destructive methods
by RILEM TC 43-CND

Abstracts of recommendations on aerated lightweight concrete
by RILEM TC 51-ALC

Draft Recommendation: Determination of the modulus of elasticity of prestressing steel strands / Determination du module d'elasticite des torons de precontrainte
by RILEM TC 80-TMS

TSB-1 Testing methods for timber structures
by RILEM TC 57-TSB

TC FAB-67: FAB1 Test methods for determining the properties of fly ash
by RILEM

TC FAB-67: FAB2 Test methods for determining the properties of fly ash for use in building materials
by RILEM

General recommendations for methods of testing load-bearing masonry
by RILEM TC 76-LUM

39-BH Draft Recommendations on winter concreting. Abstract/Projet de Recommandations de 39-BH. Abrégé
by RILEM TC 39-BH

CPC 11.3 Absorption d'eau par immersion sous vide / Absorption of water by immersion under vacuum
by RILEM TC 14-CPC

The dynamic behaviour of concrete structures - Recommendations of good practice for methods of testing and design reported by 65-MDB Committee
by RILEM TC 65-MDB