Basic documents
Application form - RILEM TC Directories - Editorial Advisory Committee of Materials and Structures - Golden rules
RILEM Technical Committees recently created
Technical Committee CTC: Corrosion initiating chloride threshold concentrations in concrete
Chair: Dr. Luping TANG
Technical Committee DUC: Design procedures for the use of composites in strengthening of reinforced concrete structures
Chair: Dr. Carlo PELLEGRINO
Technical Committee EPE: Electrokinetic processes in Civil and Environmental Engineering
Chair: Dr. Lisbeth OTTOSEN
Technical Committee FPC: Form pressure generated by fresh concrete
Chair: Dr Peter H. BILLBERG
Technical Committee MCT: Multi-component transport and chemical equilibrium in cement based materials
Chair: Dr. Björn F. JOHANNESSON
Technical Committee MPS: Mechanical properties of self-compacting concrete
Chair: Prof. Dr. Kamal KHAYAT
Technical Committee NBM: Nanotechnology-based bituminous materials
Chair: Prof. Björn BIRGISSON
Technical Committee PSC: Performance-based specifications and control of concrete durability
Chair: Dr. Hans D. BEUSHAUSEN
Technical Committee TDT: Test methods and design of textile reinforced concrete
Chair: Prof. Dr.- Wolfgang BRAMESHUBER
Other active RILEM Technical Committees
Technical Committee 203-RHM: Repair mortars for historic masonry
Chair: Dr. Caspar J.W.P. GROOT
Technical Committee 206-ATB: Advanced testing and characterization of bituminous materials
Chair: Dr. Manfred N. PARTL
Technical Committee 207-INR: Interpretation of NDT results and assessment of RC structures
Chair: Prof. Denys BREYSSE
Technical Committee 208-HFC: High performance fibre reinforced cementitious composites
Chair: Prof. Victor C. LI
Technical Committee 209-RFC: Rheology of cement based materials such as fresh concrete
Chair: Dr. Ólafur WALLEVIK
Technical Committee 210-CAP: Cracking in asphalt pavements
Chair: Prof. André A. A. MOLENAAR
Technical Committee 211-PAE: Performance of cement-based materials in aggressive aqueous environments
Chair: Prof. Mark G. ALEXANDER
Technical Committee 212-ACD: Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete
Chair: Prof. Masayasu OHTSU
Technical Committee 213-MAI: Model assisted integral service life prediction of steel reinforced concrete structures with respect to corrosion induced damage
Chair: Dr. Carmen ANDRADE
Technical Committee 214-CCD: Concrete cracking and its relation to durability: Integrating material properties with structural performance
Chair: Prof. Jason WEISS
Technical Committee 215-AST: In-situ assessment of structural timber
Chair: Prof. Bohumil KASAL
Technical Committee 216-SAM: Strategies for the assessment of historic masonry structures with NDT
Chair: Prof. Luigia BINDA
Technical Committee 217-PRE: Progress of recycling in the built environment
Chair: Prof. Dr. Enric VÁZQUEZ
Technical Committee 218-SFC: Sonic methods for quality control of fresh cementitious materials
Chair: Prof. Dr.- Hans W. REINHARDT
Technical Committee 219-ACS: Alkali Aggregate Reaction in Concrete Structures: Performance Testing and Appraisal
Chair: Dr. Philip NIXON
Technical Committee 221-SHC: Self-healing phenomena in cement-based materials
Chair: Dr Erik SCHLANGEN
Technical Committee 222-SCF: Simulation of fresh concrete flow
Chair: Dr. Nicolas ROUSSEL
Technical Committee 223-MSC: Masonry strengthening with composite materials
Chair: Dr. Maria Rosa VALLUZZI
Technical Committee 224-AAM: Alkali activated materials
Chair: Prof. Jan S. J. VAN DEVENTER
Technical Committee 225-SAP: Application of super absorbent polymers in concrete construction
Chair: Prof. Dr.- Viktor MECHTCHERINE
Technical Committee 226-CNM: Reinforced concrete in the context of nuclear waste management
Chair: Mme Valérie L'HOSTIS
Technical Committee 227-HPB: Physical Properties and behaviour of High-Performance Concrete at high temperature
Chair: Univ. Prof Ulrich SCHNEIDER
Technical Committee EAC: Educational Activity Committee
Chair: Prof. Ole Mejlhede JENSEN
Technical Committee OFS: Optical fiber sensors for civil engineering applications
Chair: Prof. Christopher LEUNG
RILEM Technical Committees which completed their tasks recently
Technical Committee 193-RLS: Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements
Chair: Dr Benoît BISSONNETTE
Technical Committee 194-TDP: Application of Titanium dioxide photocatalysis to construction materials
Chair: Prof. Dr. Yoshihiko OHAMA
Technical Committee 195-DTD: Recommendation for test methods for autogenous deformation and thermal dilation of early age concrete
Chair: Mr. Tor Arne HAMMER
Technical Committee 196-ICC: Internal curing of concretes
Chair: Prof. Konstantin KOVLER
Technical Committee 197-NCM: Nanotechnology in construction materials
Chair: Prof. Dr. Peter J. M. BARTOS
Technical Committee 201-TRC: Textile reinforced concrete
Chair: Prof. Dr.- Wolfgang BRAMESHUBER
Technical Committee 205-DSC: Durability of Self-Compacting Concrete
Chair: Prof. Dr. Geert DE SCHUTTER
Joint Committees
JCSS: Joint Committee on Structural Safety
