Over 200 RILEM Technical Recommendations have been produced by RILEM Technical Committees. Many of these recommendations have been adopted in research and practice, and are used by international standardisation bodies, as a basis for their work.
All RILEM recommendations reflect the state-of-the-art at the time of publishing. Note that these documents may be superseded later by more recent recommendations.
Technical Committees Recommendations published by Springer from January 2006 until now
Recommendation of RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity, April 2017
Recommendation of RILEM TC 212-ACD : acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete / Test method for damage qualification of reinforced concrete beams by acoustic emission
Recommendation of RILEM TC 212-ACD : acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete / Test method for classification of active cracks in concrete structures by acoustic emission
Update of the recommendation of RILEM TC 189-NEC ?Non-destructive evaluation of the concrete cover? « Comparative test - part I ? Comparative test of penetrability methods », Materials & Structures, v38, Dec 2005, pp.895-906
Technical Committees Recommendations published by RILEM Publications S.A.R.L. between January 1996 to December 2005
Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: bending test
Title: Recommendations of RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: bending test
Author(s): RILEM TC 162-TDF
Paper category : journal
Serial title: Materials and Structures
Abreviated Serial title: Mater. Struct.
Publisher: RILEM Publications SARL
Issue date: 2002-11-01
Publication year: 2002
Pages: 579 - 582
Total Pages: 4
This test method evaluates the tensile behaviour of
steel fibre-reinforced concrete either in terms of areas
under the load-def lection curve or by the load bearing
capacity at a certain deflection or crack mouth opening
displacement (CMOD)obtained by testing a simply sup-
ported notched beam under three-point loading.
This standard is not intended to be applied in the
case of shotcrete.
This test method can be used for the determination of:
- the limit of proportionality (LOP),i.e.the stress which
corresponds to the point on the load-def lection or load-
crack mouth opening displacement curve (=>F(L) )defined
in part 5 as limit of proportionality;
- two equivalent flexural tensile strengths which iden-
tify the material behaviour up to the selected deflection.
These equivalent f lexural tensile strengths are determi-
ned according to part 5;
- four residual flexural tensile strengths which identify
the material behaviour at a selected deflection or
CMOD.The residual flexural tensile strengths are cal-
culated according to procedures in part 5.
If the objective of the test is to calculate equivalent
flexural tensile strength,it is necessary to measure the
deflection.However if only residual f lexural tensile
strengths are calculated,one can choose between the mea-
surement of def lection and/or CMOD.A relation bet-
ween mid-span deflection and CMOD is given in part 6.
Online publication: 2002-09-27
Classification: RILEM Technical Committees
Publication type : full_text
Public price (Euros): 0.00
>> Click here to view the paper