Proceedings pro009 : 2nd International RILEM Symposium on Adhesion between Polymers and Concrete

Title: 2nd International RILEM Symposium on Adhesion between Polymers and Concrete Edited by Y. Ohama and M. Puterman ISBN: 2-912143-11-X e-ISBN: 2351580249 Pages: 600 Publication date: 1999

Protection, repair, coating and strengthening of concrete structures have become in the last two decades a wide and important field of use and application of polymers in building and civil engineering. Polymers are now replacing the conventional cementitious and mineral based materials that have been used for these purposes until not long ago.
These applications include industrial flooring, repair of damaged or corroded concrete structures, protection of concrete substrates against chemical and environmental attacks and many more.
The introduction of the polymer-based materials has been and still is an important contribution to the concrete construction industry and adds much to the quality and durability of the concrete structure in harsh environments. Yet, it raised new problems and questions which have to be studied and understood in order to make the best and most efficient use of the newmaterials and systems. The most important feature which might affect the combined concrete/polymer system is, no doubt, the adhesion between the concrete substrate and the polymer coating.

The aim of ISAP '99 is, hence, to bring together again all those interested in the field, and to exchange information and
knowledge on scientific, engineering and technical levels. The symposium deals with a variety of related subjects:
* Scientific and engineering aspects of adhesion
* Materials and adhesion: properties of bonding materials
* Practical bonding aspects
* Repair methods of concrete substrates
* Durability and aging factors
* Testing procedures and methods

Contents

Foreword Author(s): Y. Ohama, M. Puterman

Pages: XIII - XIV

Membership Author(s): Y. Ohama, M. Puterman

Pages: XV - XV

Part 1 - Scientific and engineering aspects

Some thoughts about gluing and its applications in construction Author(s): Y. Mouton

Pages: 3 - 7

How to analyse thermodynamic properties of solids and liquids in relation with adhesion? Author(s): L. Courard

Pages: 9 - 19

The blister-test to determine the bond strength between polymer coatings and concrete Author(s): M. Günter

Pages: 21 - 33

Fracture behaviour of PCC Author(s): H. Schorn

Pages: 35 - 44

Part 2 - Materials and adhesion

Adhesion between fresh polymethyl methacrylate mortar and fresh cement mortar or concrete Author(s): Y. Ohama, K. Demura, M.A.R. Bhutta, T. Kobayashi, T. Kawano

Pages: 47 - 56

The influence of coupling agent on the properties of vinylester mortar Author(s): L. Czarnecki, B. Chmielewska

Pages: 57 - 65

Thermally-induced interface stresses in polymer concrete - Portland cement concrete composite beams Author(s): D.U. Choi, D.W. Fowler, D.L. Wheat

Pages: 67 - 81

Characteristics of bond between concrete layers Author(s): J. Sustersi, A. Sajna, V. Ukrainczyk, A. Zajc

Pages: 83 - 92

Paste-aggregate adhesion in polymer-cement porous concrete Author(s): A. Beeldens, D. van Gemert

Pages: 93 - 102

Effect of redispersible polymer powder addition to ultra rapid hardening cement mortar on strength development Author(s): M. Wakasugi, T. Yamamoto, A. Sugiura, H. Sakakibara

Pages: 103 - 110

The influence of curing and surface preparation on the adhesion of protective coatings on concrete Author(s): Y. Ballim, B.T. Benn

Pages: 111 - 120

Part 3 - Surface coatings

Theoretical analysis of suppressive effects of polymeric surface finishing materials on corrosion of reinforcing steel in neutralized concrete Author(s): T. Fukushima

Pages: 123 - 137

Concrete microscopy applied to the study of surface coatings: Case studies Author(s): J.A. Larbi

Pages: 139 - 150

Study on the stresses and deformations of concrete members due to setting shrinkage of polymer mortar Author(s): M. Kawakami, H. Tokushige, H. Todate, F. Omata, K. Doiuchi

Pages: 151 - 159

Aspects related to the adhesion property of a polymer used for protection of concrete in nuclear power plants Author(s): C. Seni

Pages: 161 - 171

A usability approach to technical evaluation of the polymer coatings for concrete substrate Author(s): L. Czaenecki, P. Lukowski

Pages: 173 - 180

2-component coatings on concrete: some physical and chemical aspects of adhesion Author(s): F.J. Bundies

Pages: 181 - 192

Influences on the adhesion quality of epoxy coatings on concrete Author(s): K. Littmann, B. Schwamborn

Pages: 193 - 203

Adhesion versus impregnation - binding to concrete Author(s): J. Bordado

Pages: 205 - 210

Durability of polymer coatings as protection against carbonation and chloride penetration Author(s): M. Fiebrich

Pages: 211 - 232

Part 4 - Practical bonding aspects

Enhancement of adhesion of cementitious-rendering to concrete by polymeric additives Author(s): M. Puterman

Pages: 235 - 246

Evaluation method for adhesion test results of bonded wet concrete to epoxies Author(s): J.B. Aguiar

Pages: 247 - 256

Adhesion and integrity of joints between construction materials Author(s): D.J. Cleland, P.A.M. Basheer

Pages: 257 - 265

Effects of the increased fibre surface wettability on the polypropylene fibre-concrete interfacial bonding and the properties of the polypropylene fibre reinforced concrete Author(s): L. Tu, D. Kruger, P.A.B. Carstens

Pages: 267 - 284

Evaluation de l'adhérence sur béton d'un système de préparation des sols avant pose d'un revêtement Author(s): G. Colin, M. Crespel, M. Curt

Pages: 285 - 298

Modelling of effects of shrinkage on the performance of adhesives Author(s): J. Bijen, E. Schlangen, T. Salet

Pages: 299 - 310

Sanatations of reinforced concrete bridges with the polymer based materials Author(s): K. Slopkova

Pages: 311 - 317

Paving blocks as composite elements of polymer bound surface-concrete and cement bound core-concrete Author(s): M. Schmitz, T. Kohlmeyer

Pages: 319 - 327

Part 5 - Repair methods

The problems with the bond strength of repair mortar Author(s): R. Drochytka, P. St pánek

Pages: 331 - 338

Adhesion properties of polymer composite materials for concrete repair Author(s): K.S. Yeon, Y.S. Lee, K.Y. Ji, Y.S. Shin

Pages: 339 - 347

The temperature distribution in repair concrete due to the application of welding sheets and asphaltic layers on concrete bridge decks Author(s): F. Grossmann

Pages: 349 - 361

Effect of externally bonded fibre reinforced polymers on the tension stiffening behaviour of concrete prisms Author(s): S. Matthys, L. Taerwe, P. de Meyer

Pages: 363 - 373

Shear strengthening of concrete beams with FRP laminates Author(s): C. Modena, C. Pellegrino, G. Golfetto

Pages: 375 - 386

Epoxy injection - The effects and myths of pressure Author(s): M.A. Murray

Pages: 387 - 395

An assessment of usability of injection materials for crack repairs in concrete structures Author(s): L. Czarnecki, W. Glodkowska, Z. Piatek

Pages: 397 - 404

The renovation of cement-concrete road surface based on polymer-concrete Author(s): D. Durcanská

Pages: 405 - 412

Humboldt bay nuclear power plant caisson inleakage repair project - Eureka, California USA Author(s): M.M. Rourke

Pages: 413 - 429

Part 6 - Testing methods

In-situ testing of adhesion between polymer-modified bituminous waterproofing membranes and concrete Author(s): K. Oba, M.N. Partl, S. Hean

Pages: 433 - 445

Integrated non-destructive testing diagnosis of concrete structures Author(s): X. Peng, A.T. Moczko, P. Stroeven, Y. Cheng

Pages: 447 - 458

Application of ultrasonic wave propagation to the cure monitoring of epoxy adhesives for restoration of concrete Author(s): M. Frigione, V.A.M. Luprano, A. Maffezzoli

Pages: 459 - 465

Non-destructive methods to assess adhesion between polymer composites and Portland cement concrete Author(s): A. Garbacz, L. Czarnecki, J.R. Clifton

Pages: 467 - 474

Dimensional changes of polymer cement mortars based on latices and redispersible polymer powders due to moisture transport Author(s): H. Justnes, T. Reynaers, W. van Zundert

Pages: 475 - 484

Adhesion and the new series of European standards on protection and repair of concrete structures Author(s): H.R. Sasse, R. Stenner

Pages: 485 - 494

Part 7 - Durability and ageing

A repair system of concrete corroded by bacteria using HDPE sheets and mortar admixed with inhibitor Author(s): A. Negishi, T. Maeda

Pages: 497 - 510

Effects of sunshine/rain cycles on the behaviour of repairing systems Author(s): L. Courard, R. Degeimbre, A. Darimont

Pages: 511 - 521

The effect of environmental factors on the adhesion of epoxy adhesives to concrete Author(s): A. Çolak, B. Sayil

Pages: 523 - 530

Effect of remainder SO4 ²- ions on durability of concrete protective coating Author(s): F. Fujisawa, W. Jang, T. Nonaka

Pages: 531 - 543

Influence of mechanical characteristics and surface configurations of substrate concrete on separation resistance of synthetic resin floor coatings against dynamic load of caster traffic Author(s): E. Sakai, T. Mikami

Pages: 545 - 553

Polymeric adhesives for the restoration of concrete structures: Environmental effects Author(s): M.A. Aiello, M. Frigione, D. Acierno

Pages: 555 - 558

FRP lining adhering to secondary concrete of shield tunnel and analysis of peeling by backwater pressure Author(s): Y. Urakami

Pages: 559 - 569

Application of recycled polyester resin for segmental precast concrete beams jointers Author(s): D. Suraatmadja, D.R. Munaf, B. Lationo, H. Riyanto, A. Karjanto

Pages: 571 - 580