Characterisation of light weight concrete impregnated with cement and charcoal

Author(s): T. G. Bikoko, V. Y. Katte, G. N. Bawe, M. Fokou Dongmene, F. N. Okonta, J. C. Tchamba
Paper category: Proceedings
Book title: 3rd International Conference on Bio-Based Building Materials ICBBM 2019
Editor(s): Mohammed Sonebi and Sofiane Amziane
e-ISBN: 978-2-35158-229-9
Publisher: RILEM Publications SARL
Publication year: 2019
Pages: 229-237
Total Pages: 09
Language: English

Abstract: This paper reports the results of a study on the formulation and characterization of lightweight concrete made with Cameroonian charcoal as lightweight aggregate. Lightweight concrete is an old material and has been known around the world for over a quarter of a century. They are experiencing a renewed interest, which seems quite deserved because of their properties; it belongs to the family of special concretes. These characteristics suggest new applications. Lightweight concrete has low density than ordinary concrete and the use of concrete of low density contributes to the reduction of the weight of the elements built with this concrete and subsequently the dimensions of the load-bearing elements, resulting in the reduction of the forces transmitted to the ground by the foundations, and consequently the dimensions of the latter, which allows the construction on soils of low bearing capacity. In this study, we first determined the characteristics of the constituent materials of our lightweight concrete, and then we formulated our lightweight concrete through two distinct formulation methods, namely the Dreux-Gorisse method and the progressive introduction method. Following these formulations, we have made several samples of lightweight concrete. Using laboratory tests, we have determined some of the physical and mechanical characteristics of these lightweight concrete samples. The results showed that when the charcoal content increases in the concrete, its water absorption rate increases. This is accompanied by a decrease of the mechanical strength. The mechanical strength of concrete evolves with time. The tensile strength is about 5 times lower than the compressive strength. The lightweight concretes developed are applicable for masonry bricks production in accordance with SANS 1215, NF DTU 20-1 (1999), NF P 14-304 (1983), NF EN 771-3 (2011) and NF EN 771-3 / CN (2012).

Online publication: 2019
Publication type : full_text
Public price (Euros): 0.00

>> You must be connected to view the paper. You can register for free if you are not a member