Over 200 RILEM Technical Recommendations have been produced by RILEM Technical Committees. Many of these recommendations have been adopted in research and practice, and are used by international standardisation bodies, as a basis for their work.
All RILEM recommendations reflect the state-of-the-art at the time of publishing. Note that these documents may be superseded later by more recent recommendations.
Technical Committees Recommendations published by Springer from January 2006 until now
Recommendation of RILEM TC 243-SGM: functional requirements for surface repair mortars for historic buildings, February 2019
Recommendation of RILEM TC 237-SIB on affinity between aggregates and bituminous binders, December 2018
Recommendation of RILEM TC 238-SCM on hydration stoppage by solvent exchange for the study of hydrate assemblages, December 2018
Recommendation of RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity, April 2017
Recommendation of RILEM TC 212-ACD : acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete / Test method for damage qualification of reinforced concrete beams by acoustic emission
Recommendation of RILEM TC 212-ACD : acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete / Test method for classification of active cracks in concrete structures by acoustic emission
Update of the recommendation of RILEM TC 189-NEC ‘Non-destructive evaluation of the concrete cover’ « Comparative test - part I – Comparative test of penetrability methods », Materials & Structures, v38, Dec 2005, pp.895-906
Technical Committees Recommendations published by RILEM Publications S.A.R.L. between January 1996 to December 2005
Recommendation of RILEM TC 182-PEB on bending beam and rheometer measurements of bituminous binders
Title: Recommendation of RILEM TC 182-PEB on bending beam and rheometer measurements of bituminous binders
Author(s): RILEM TC 182 PEB, D. SYBILSKI, A. Vanelstraete, M. N. Partl
Paper category : journal
Serial title: Materials and Structures
Abreviated Serial title: Mater. Struct.
Publisher: RILEM Publications SARL
Issue date: 2004-10-01
Publication year: 2004
Pages: 539 - 546
Total Pages: 8
Nb references: 18
These recommendations present the results and conclusions of the first and second inter-laboratory tests initiated by two consecutive RILEM Technical Committees TC 152-PBM “Performance of Bituminous Materials” and TC 182-PEB “Performance Testing and Evaluation of Bituminous Materials”. The first test was initiated in 1994  and the second one, which was its follow-up, in 1998. Both inter-laboratory tests were led by Task Group TG1 “Bituminous Binders”. The aim of the tests was to compare the results of dynamic rheology measurements of bituminous binders. While the first inter-laboratory test was limited to dynamic rheometer (DR) measurements, the second inter-laboratory test also covered rheological testing with bending beam rheometers BBR at low temperatures. Furthermore, the influence of binder ageing, both short and long term, was included in the second inter-laboratory test. Short term ageing was performed according to  using rolling thin film oven tests (RTFOT) at 163ºC and long term ageing according to  by applying an additional pressure ageing vessel conditioning (PAV) at 100ºC.
In the DR measurement part of the second inter-laboratory test, eighteen laboratories participated in the first phase (tests on original binders) and fourteen laboratories in the second phase (tests after RTFOT and after RTFOT + PAV-ageing). In the BBR part, fourteen laboratories participated in the first phase and ten laboratories in the second phase.
Online publication: 2004-08-17
Classification: RILEM Technical Committees
Publication type : full_text
Public price (Euros): 0.00
>> Click here to view the paper