• Home

TC Activity

RILEM Technical Committees recently created

• Technical Committee : 001-CW : Winter concreting
  
  
  
• Technical Committee : 002-HC : Concrete and reinforced concrete in hot countries
  
  
  
• Technical Committee : 003-TT : Testing methods of timber
  
  
  
• Technical Committee : 004-CDC : Durability of concrete
  
  
  
• Technical Committee : 005-LC : Lightweight concretes
  
  
  
• Technical Committee : 006-PAN : Natural and artificial stones: Methods of testing
  
  
  
• Technical Committee : 007-NDT : Non-destructive tests of concrete
  
  
  
• Technical Committee : 008-SR : Research and testing on synthetic resins in building construction
  
  
  
• Technical Committee : 009-RC : Test and specifications of steel for reinforced and prestressed concrete
  
  
  
• Technical Committee : 010-SC : Statistical control of the quality of concrete
  
  
  
• Technical Committee : 011-A : Admixtures
  
  
  
• Technical Committee : 012-CRC : Concrete reinforcements corrosion
  
  
  
• Technical Committee : 013-MR : Mortars and renderings
  
  
  
• Technical Committee : 014-CPC : Concrete permanent committee
  
  
  
• Technical Committee : 015-PM : Investigation on porosity in building materials
  
  
  
• Technical Committee : 016-C : Investigation on carbonation
  
  
  
• Technical Committee : 017-BM : Bitumens and bituminous materials
  
  
  
• Technical Committee : 018-REF : Refractory concretes
  
  
  
• Technical Committee : 019-FRC : Fibre reinforced cement composites
  Chair : Dr. Amal MAJUMDAR
  
  
• Technical Committee : 020-TBS : Testing building structures in situ
  
  
  
• Technical Committee : 021-IL : Impact loading on building
  
  
  
• Technical Committee : 022-AT : Accelerated tests
  
  
  
• Technical Committee : 023-GP : Gypsum plasters
  
  
  
• Technical Committee : 024-BW : Load-bearing walls and masonry
  
  
  
• Technical Committee : 025-PEM : Preservation of natural stone monuments
  
  
  
• Technical Committee : 026-GM : Granular materials
  
  
  
• Technical Committee : 027-EVS : Evaluation of external vertical façades
  
  
  
• Technical Committee : 028-MIM : Moisture insulating materials
  
  
  
• Technical Committee : 029-PSP : Pore structure and properties of materials
  
  
  
• Technical Committee : 030-TE : Testing equipment
  
  
  
• Technical Committee : 031-PCM : Performance criteria for materials
  
  
  
• Technical Committee : 032-RCA : Resistance of concrete to chemical attack
  
  
  
• Technical Committee : 033-AC : Analysis of fresh and hardened concrete
  
  
  
• Technical Committee : 034-APB : Ageing of polymers in building
  
  
  
• Technical Committee : 035-PMB : Methods of predicting moisture conditions in building materials and components
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 036-RDL : Long-term random dynamic loading of concrete structures
  
  
  
• Technical Committee : 037-DRC : Demolition and reuse of concrete
  
  
  
• Technical Committee : 038-AAR : Ageing, appearance and restoration of materials
  
  
  
• Technical Committee : 039-BH : Winter concreting
  
  
  
• Technical Committee : 040-TPC : Testing of precast concrete elements
  
  
  
• Technical Committee : 041-HOL : Holography in testing models of structures
  
  
  
• Technical Committee : 042-CEA : Properties of concrete at early ages
  
  
  
• Technical Committee : 043-CND : Combined non-destructive testing of concrete
  
  
  
• Technical Committee : 044-PHT : Properties of materials at high temperatures
  
  
  
• Technical Committee : 045-LTO : Long-term observation of structures
  
  
  
• Technical Committee : 046-FST : Fatigue of steel temperature effects
  
  
  
• Technical Committee : 047-SM : Synthetic membranes
  
  
  
• Technical Committee : 048-FC : Testing of ferrocement
  
  
  
• Technical Committee : 049-TFR : Testing methods for fibre reinforced cement-based composites
  
  
  
• Technical Committee : 050-FMC : Fracture mechanics of concrete
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 051-ALC : Light-weight aerated concrete
  
  
  
• Technical Committee : 052-RAC : Resin adherence to concrete
  
  
  
• Technical Committee : 053-MTC : Multi-axial testing of concrete
  
  
  
• Technical Committee : 054-PIC : Polymer impregnated concrete
  
  
  
• Technical Committee : 055-CCA : Corrosion of galvanized steel tap-water piping
  
  
  
• Technical Committee : 056-MHM : Hydrocarbon materials
  
  
  
• Technical Committee : 057-TSB : Testing of timber structures and building boards
  
  
  
• Technical Committee : 058-VPM : Aging of monument stones
  
  
  
• Technical Committee : 059-TPM : Treatment and protection of monuments
  
  
  
• Technical Committee : 060-CSC : Corrosion of steel in concrete
  
  
  
• Technical Committee : 061-SLB : Effects of seismic loading on building materials
  
  
  
• Technical Committee : 062-SFC : Soiling and cleaning of façades
  
  
  
• Technical Committee : 063-LBM : Laterite-based materials
  
  
  
• Technical Committee : 064-BT : Bearing transfers by joints and interfaces
  
  
  
• Technical Committee : 065-MDB : The dynamic behavior of concrete structures
  
  
  
• Technical Committee : 066-BJS : Building joint seals
  
  
  
• Technical Committee : 067-FAB : Use of fly-ash in building
  
  
  
• Technical Committee : 068-MMH : Mathematical modelling of cement hydratation
  
  
  
• Technical Committee : 069-MMC : Mathematical modelling of creep and shrinkage of concrete
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 070-OMD : Optimized mix design of concrete
  
  
  
• Technical Committee : 071-PSL : Prediction of service life of building materials and components
  
  
  
• Technical Committee : 072-SMS : Stochastic methods in material and structural engeneering
  
  
  
• Technical Committee : 073-SBC : Use of siliceous by-products in cement and concrete
  
  
  
• Technical Committee : 074-THT : Test methods for high temperature properties
  
  
  
• Technical Committee : 075-SLR : Single layer roofing
  
  
  
• Technical Committee : 076-LUM : Load bearing masonry
  
  
  
• Technical Committee : 077-RRT : Reciprocal recognition of test results
  
  
  
• Technical Committee : 078-MCA : Recommended practice for aerated concrete based on RILEM testing methods
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 079-PAC : Phase analysis of cement
  
  
  
• Technical Committee : 080-TMS : Tension modulus of prestressing steel stands
  
  
  
• Technical Committee : 081-LCP : Load bearing concrete panels and assemblies
  
  
  
• Technical Committee : 082-PGP : Properties of gypsum plaster
  
  
  
• Technical Committee : 083-CUS : Fundamental mechanical properties of metals
  
  
  
• Technical Committee : 084-AAC : Application of admixtures to concrete
  
  
  
• Technical Committee : 085-TAC : Test methods for chemical admixtures for concrete
  
  
  
• Technical Committee : 086-PCW : Protective coating for wood
  
  
  
• Technical Committee : 087-LAC : Lightweight aggregates for concrete
  
  
  
• Technical Committee : 088-TPP : Testing of plastic pipes
  
  
  
• Technical Committee : 089-FMT : Fractures mechanics of concrete - test methods
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 090-FMA : Fracture mechanics of concrete - applications
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 091-CRL : Guidelines for cement and concrete reference laboratories
  
  
  
• Technical Committee : 092-ECM : Efficiency of concrete mixers
  
  
  
• Technical Committee : 093-ES : Expert systems for materials and structures
  
  
  
• Technical Committee : 094-CHC : Concrete for hot countries
  
  
  
• Technical Committee : 095-PPC : Physical properties of precast concrete elements
  
  
  
• Technical Committee : 096-EB : Earth construction
  
  
  
• Technical Committee : 097-GCR : Applications of geotextiles to crack prevention in roads
  
  
  
• Technical Committee : 098-PDE : Probabilistic methods in experimental studies
  
  
  
• Technical Committee : 099-TRC : Measurement of temperature rise in concrete after setting
  
  
  
• Technical Committee : 100-TSL : Prediction techniques of service life
  
  
  
• Technical Committee : 101-BAT : Bitumens and asphalt testing
  Chair : Mr. Hermann W. FRITZ
  
  
• Technical Committee : 102-AFC : Ageing and durability of fibre concrete
  
  
  
• Technical Committee : 103-MGH : Mechanical and hydraulic testing of geomembranes
  
  
  
• Technical Committee : 104-DCC : Damage classification of concrete structures
  Chair : Prof. Dr. Tibor JAVOR
  
  
• Technical Committee : 105-CPC : Concrete-polymer composites
  
  
  
• Technical Committee : 106-AAR : Alkali-aggregate reaction
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 107-CSP : Creep and shrinkage prediction models
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 108-ICC : Interface between cement paste and concrete constituents
  
  
  
• Technical Committee : 109-TSA : Behaviour of timber structures under seismic action
  
  
  
• Technical Committee : 110-TFM : Application of fracture mechanics to timber structures
  
  
  
• Technical Committee : 111-CST : Behaviour of timber and concrete composite load bearing structures
  
  
  
• Technical Committee : 112-TSC : Creep in timber structures
  
  
  
• Technical Committee : 113-CPT : Test methods for concrete-polymer composites
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 114-CCS : Computer programmes for creep and shrinkage analysis of concrete structures
  Chair : Prof. Ignacio CAROL
  
  
• Technical Committee : 115-HSC : High strength concrete
  
  
  
• Technical Committee : 116-PCD : Permeability of concrete as a criterion of its durability
  Chair : Prof. Dr.-Ing. Hubert Karl HILSDORF
  
  
• Technical Committee : 117-FDC : Freeze-thaw and de-icing resistance of concrete
  
  
  
• Technical Committee : 118-IC : Ice and construction
  
  
  
• Technical Committee : 119-TCE : Avoidance of thermal cracking at early ages
  
  
  
• Technical Committee : 120-MRS : Membrane roofing systems
  
  
  
• Technical Committee : 121-DRG : Guidance for demolition and re-use of concrete and masonry
  
  
  
• Technical Committee : 122-MLC : Microcracking and lifetime performance of concrete
  
  
  
• Technical Committee : 123-MME : Use of microstructural models and expert systems for cementitious materials
  
  
  
• Technical Committee : 124-SRC : Repair strategies for concrete structures damaged by steel corrosion
  
  
  
• Technical Committee : 125-DT : Design by testing
  
  
  
• Technical Committee : 126-IPT : In-place testing of hardened concrete
  Chair : Dr. Nicholas CARINO
  
  
• Technical Committee : 127-MS : Masonry materials and structures
  
  
  
• Technical Committee : 128-MRC : Materials requirements for repair of corrosion damaged reinforced concrete structures
  
  
  
• Technical Committee : 129-MHT : Test methods for mechanical properties of concrete at high temperatures
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 130-CSL : Calculation methods for service life design of concrete structures
  
  
  
• Technical Committee : 131-ONM : Testing Methods for characterizing old and new mortars
  
  
  
• Technical Committee : 132-MGI : Geometrical and mechanical imperfections of metal components and strucures
  
  
  
• Technical Committee : 133-TF : Fracture of timber
  Chair : Prof. Alpo RANTA-MAUNUS
  
  
• Technical Committee : 134-MJP : Characterization of ultimate limit state performance of metal joints
  
  
  
• Technical Committee : 135-MHC : High cycle fatigue behaviour of metallic materials, joints ans structural components
  
  
  
• Technical Committee : 136-NDI : Non-destructive inspection of materials and structures
  
  
  
• Technical Committee : 137-CS : Composite structures
  
  
  
• Technical Committee : 138-MTW : Test methods for thin-walled metal structures and members
  Chair : Dr. Andreas T. WOLF
  
  
• Technical Committee : 139-DBS : Durability of building sealants
  
  
  
• Technical Committee : 140-TSL : Prediction of service life of building materials and components
  Chair : Dr. Christer SJÖSTRÖM
  
  
• Technical Committee : 141-SSM : Stainless steel as building material
  
  
  
• Technical Committee : 142-MCL : Testing of metallic structural materials for determining stress-strain relations under cyclic loading
  
  
  
• Technical Committee : 143-QSC : Quality assessment of sprayed concrete
  
  
  
• Technical Committee : 144-GMP : Geomenbranes - Mechanical and physical testing
  
  
  
• Technical Committee : 145-WSM : Workability of special concrete mixes
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 146-TCF : Tightness of concrete with respect to fluids
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 147-FMB : Fracture mechanics applications to anchorage and bond
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 148-SSC : Test methods for the strain softening response of concrete
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 149-HTS : Diagnosis and repair of historic load-bearing timber structures
  Chair : Prof. Ing. Luca UZIELLI
  
  
• Technical Committee : 150-ECM : Efficiency of concrete mixers
  Chair : Prof. Harald BEITZEL
  
  
• Technical Committee : 151-APC : Adhesion technology in concrete engineering - Physical and chemical aspects
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 152-PBM : Performance of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 153-CEB : Building with earth - Compressed earth block technology
  
  
  
• Technical Committee : 154-EMC : Electrochemical techniques for measuring metallic corrosion in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 155-TCW : Test methods for creep measurements of wooden materials
  
  
  
• Technical Committee : 156-CPD : Durability of concrete polymer composites
  
  
  
• Technical Committee : 157-PRC : Systems to prevent reflective cracking on pavement
  
  
  
• Technical Committee : 158-AHC : The role of admixtures in high performance concrete
  
  
  
• Technical Committee : 159-ETC : Engineering of the interfacial transition zone in cementitious composites
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 160-MLN : Methodology for life prediction of concrete structures in nuclear power plants
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 161-GMC : Modelling the behaviour of concretes in service: a guide for the engineer
  Chair : M. Marcel CHEYREZY
  
  
• Technical Committee : 162-TDF : Test and design methods for steel fibre reinforced concrete
  Chair : Prof. Dr Ir. Lucie VANDEWALLE
  
  
• Technical Committee : 163-TPZ : Interfacial transition zone and properties of transfer
  Chair : Prof. Ginette ARLIGUIE
  
  
• Technical Committee : 164-EBM : Mechanics of earth as a building material
  Chair : M. Ahmed HAKIMI
  
  
• Technical Committee : 165-SRM : Sustainable application of mineral raw materials in construction
  
  
  
• Technical Committee : 166-RMS : Roofing membranes and systems
  Chair : Mr. Walter J. ROSSITER
  
  
• Technical Committee : 167-COM : Characterisation of old mortars with respect to their repair
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 168-MMM : Computer modelling of mechanical behaviour of masonry structures
  Chair : Prof. Gyan PANDE
  
  
• Technical Committee : 169-MTE : Test methods for load transferring metalwork used in timber engineering
  Chair : Prof. Dr.-Ing. Jürgen EHLBECK
  
  
• Technical Committee : 170-CSH : The structure of C-S-H
  Chair : Dr. Alan E. RICHARDSON
  
  
• Technical Committee : 171-ECB : Environmental criteria for building products
  Chair : Prof. Kai ÖDEEN
  
  
• Technical Committee : 172-EDM : Environmental design methods in materials and structural engineering
  Chair : Prof. Asko SARJA
  
  
• Technical Committee : 173-EID : Systematics of the environmental impact database of building materials
  Chair : Mr. Wayne B. TRUSTY
  
  
• Technical Committee : 174-SCC : Self compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 175-SLM : Computer bases on service life methodology
  
  
  
• Technical Committee : 176-IDC : Internal damage of concrete due to frost action
  Chair : Prof. Dr. Max J. SETZER
  
  
• Technical Committee : 177-MDT : Masonry durability and on-site testing
  
  
  
• Technical Committee : 178-TMC : Testing and modelling chloride penetration in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 179-CSD : Data bank of concrete creep and Shrinkage
  Chair : Prof. Harald S. MÜLLER
  
  
• Technical Committee : 180-QIC : Qualitative identification of clinker and cement
  
  
  
• Technical Committee : 181-EAS : Early age shrinkage induced stresses and cracking in cementitious systems
  Chair : Prof. Arnon BENTUR
  
  
• Technical Committee : 182-PEB : Performance testing and evaluation of bituminous materials
  
  
  
• Technical Committee : 183-MIB : Microbial impacts on building materials - Weathering and conservation
  Chair : Prof. Moema RIBAS SILVA
  
  
• Technical Committee : 184-IFE : Industrial floors for withstanding harsh environmental attacks, including repair and maintenance
  Chair : Dr. Peter SEIDLER
  
  
• Technical Committee : 185-ATC : Advanced testing of cement based materials during setting and hardening
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 186-ISA : Internal sulfate attack
  
  
  
• Technical Committee : 187-SOC : Experimental determination of the stress-crack opening curve for concrete in tension
  Chair : Prof. Jaime PLANAS
  
  
• Technical Committee : 188-CSC : Casting of self-compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 189-NEC : Non-destructive evaluation of the 'covercrete' (concrete cover)
  
  
  
• Technical Committee : 190-SBJ : Service life prediction of sealed building and construction joints
  
  
  
• Technical Committee : 191-ARP : Alkali-reactivity and prevention - Assessment, specification and diagnosis of alkali-reactivity
  
  
  
• Technical Committee : 192-ECM : Environment-conscious construction materials and systems
  Chair : Prof. Norimoto KASHINO
  
  
• Technical Committee : 193-RLS : Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements
  Chair : Prof. Benoît BISSONNETTE
  
  
• Technical Committee : 194-TDP : Application of Titanium dioxide photocatalysis to construction materials
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 195-DTD : Recommendation for test methods for autogenous deformation and thermal dilation of early age concrete
  Chair : Dr Tor Arne MARTIUS-HAMMER
  
  
• Technical Committee : 196-ICC : Internal curing of concretes
  Chair : Prof. Konstantin KOVLER
  
  
• Technical Committee : 197-NCM : Nanotechnology in construction materials
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 198-URM : Use of recycled materials in construction
  
  
  
• Technical Committee : 199-CUA : Concrete: use of additions
  Chair : Mr. José Ángel LECHUGA ALBALA
  
  
• Technical Committee : 200-HTC : Mechanical concrete properties at high temperature - Modelling and applications
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 201-TRC : Textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 202-RWD : Use of concrete in radioactive waste disposal facilities
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 203-RHM : Repair mortars for historic masonry
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 204-LTP : Life time performance of materials and structures
  
  
  
• Technical Committee : 205-DSC : Durability of Self-Compacting Concrete
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : 206-ATB : Advanced testing and characterization of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 207-INR : Interpretation of NDT results and assessment of RC structures
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 208-HFC : High performance fibre reinforced cementitious composites
  Chair : Prof. Victor C. LI
  
  
• Technical Committee : 209-RFC : Rheology of cement based materials such as fresh concrete
  Chair : Dr. Ólafur WALLEVIK
  
  
• Technical Committee : 210-CAP : Cracking in asphalt pavements
  Chair : Prof. André A. A. MOLENAAR
  
  
• Technical Committee : 211-PAE : Performance of cement-based materials in aggressive aqueous environments
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 212-ACD : Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 213-MAI : Model assisted integral service life prediction of steel reinforced concrete structures with respect to corrosion induced damage
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 214-CCD : Concrete cracking and its relation to durability: Integrating material properties with structural performance
  Chair : Prof. Jason WEISS
  
  
• Technical Committee : 215-AST : In-situ assessment of structural timber
  Chair : Prof. Dr. Ing. Bohumil KASAL
  
  
• Technical Committee : 216-SAM : Strategies for the assessment of historic masonry structures with NDT
  Chair : Prof. Luigia BINDA
  
  
• Technical Committee : 217-PRE : Progress of recycling in the built environment
  Chair : Prof. Enric VAZQUEZ RAMONICH
  
  
• Technical Committee : 218-SFC : Sonic methods for quality control of fresh cementitious materials
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 219-ACS : Alkali Aggregate Reaction in concrete structures: performance testing and appraisal
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 220-FLM : Modelling of life time of concrete under different types of frost and de-icing salt attack
  
  
  
• Technical Committee : 221-SHC : Self-healing phenomena in cement-based materials
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : 222-SCF : Simulation of fresh concrete flow
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 223-MSC : Masonry strengthening with composite materials
  Chair : Dr. Maria Rosa VALLUZZI
  
  
• Technical Committee : 224-AAM : Alkali activated materials
  Chair : Prof. Jannie S. J. VAN DEVENTER
  
  
• Technical Committee : 225-SAP : Application of super absorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 226-CNM : Reinforced concrete in the context of nuclear waste management
  Chair : Mme Valérie L'HOSTIS
  
  
• Technical Committee : 227-HPB : Physical properties and behaviour of High-Performance Concrete at high temperature
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 228-MPS : Mechanical properties of self-compacting concrete
  Chair : Prof. Kamal KHAYAT
  
  
• Technical Committee : 229-EPE : Electrokinetic processes in civil and environmental engineering
  Chair : Dr. Lisbeth OTTOSEN
  
  
• Technical Committee : 230-PSC : Performance-based specifications and control of concrete durability
  Chair : Prof. Hans D. BEUSHAUSEN
  
  
• Technical Committee : 231-NBM : Nanotechnology-based bituminous materials
  Chair : Prof. Björn BIRGISSON
  
  
• Technical Committee : 232-TDT : Test methods and design of textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 233-FPC : Form pressure generated by fresh concrete
  Chair : Dr Peter H. BILLBERG
  
  
• Technical Committee : 234-DUC : Design procedures for the use of composites in strengthening of reinforced concrete structures
  Chair : Dr. Carlo PELLEGRINO
  
  
• Technical Committee : 235-CTC : Corrosion initiating chloride threshold concentrations in concrete
  Chair : Prof. Luping TANG
  
  
• Technical Committee : 236-BBM : Bio-aggregates based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 237-SIB : Testing and characterization of sustainable innovative bituminous materials and systems
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 238-SCM : Hydration and microstructure of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 239-MCM : On-site measurement of concrete and masonry structures by visualized NDT
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 240-FDS : A framework for durability design of fibre-reinforced strain-hardening cement-based composites (SHCC)
  Chair : Prof. Gideon VAN ZIJL
  
  
• Technical Committee : 241-MCD : Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements
  Chair : Prof. William G. BUTTLAR
  
  
• Technical Committee : 242-MDC : Multi-decade creep and shrinkage of concrete: material model and structural analysis
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 243-SGM : Specifications for non-structural grouting of historic masonries and architectural surfaces
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 244-NUM : Numerical modelling of cement-based materials
  Chair : Prof. Dr. Ir. Klaas VAN BREUGEL
  
  
• Technical Committee : 245-RTE : Reinforcement of Timber Elements in Existing Structures
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 246-TDC : Test methods to determine durability of concrete under combined environmental actions and mechanical load
  Chair : Prof. Yan YAO
  
  
• Technical Committee : 247-DTA : Durability testing of alkali-activated materials
  Chair : Prof. John L. PROVIS
  
  
• Technical Committee : 248-MMB : Methods of measuring moisture in building materials and structures
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 249-ISC : Non destructive in situ strength assessment of concrete
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 250-CSM : Composites for sustainable strengthening of masonry
  Chair : Prof. Gianmarco DE FELICE
  
  
• Technical Committee : 251-SRT : Sulfate resistance testing
  Chair : Dr. Véronique BAROGHEL-BOUNY
  
  
• Technical Committee : 252-CMB : Chemo-Mechanical Characterization of Bituminous Materials
  Chair : Dr. Nicole KRINGOS
  
  
• Technical Committee : 253-MCI : Microorganisms-cementitious materials interactions
  Chair : Prof. Alexandra BERTRON
  
  
• Technical Committee : 254-CMS : Thermal cracking of massive concrete structures
  Chair : Prof. Eduardo M.r. FAIRBAIRN
  
  
• Technical Committee : 255-FRS : Fire resistance of concrete structures repaired with polymer cement mortar
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 256-SPF : Spalling of concrete due to fire: testing and modelling
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 257-DHM : Design and application of hydraulic grouts for repair and strengthening of historic masonry structures
  Chair : Dr. Androniki MILTIADOU-FEZANS
  
  
• Technical Committee : 258-AAA : Avoiding alkali aggregate reactions in concrete - Performance based concept
  Chair : Prof. Børge Johannes WIGUM
  
  
• Technical Committee : 259-ISR : Prognosis of deterioration and loss of serviceability in structures affected by alkali-silica reactions
  Chair : Prof. Victor E. SAOUMA
  
  
• Technical Committee : 260-RSC : Recommendations for use of superabsorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 261-CCF : Creep behavior in Cracked Sections of Fiber Reinforced Concrete
  Chair : Prof. Pedro SERNA ROS
  
  
• Technical Committee : 262-SCI : Characteristics of the steel/concrete interface and their effect on initiation of chloride-induced reinforcement corrosion
  Chair : Prof. Dr Ueli ANGST
  
  
• Technical Committee : 263-EEC : Environmental evaluation of concrete structures toward sustainable construction
  Chair : Prof. Amnon KATZ
  
  
• Technical Committee : 264-RAP : Asphalt Pavement Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 265-TDK : Testing methods for determination of double-K criterion for crack propagation in concrete
  Chair : Prof. Shilang XU
  
  
• Technical Committee : 266-MRP : Measuring Rheological Properties of Cement-based Materials
  Chair : Prof. Dr. Mohammed SONEBI
  
  
• Technical Committee : 267-TRM : Tests for reactivity of supplementary cementitious materials
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 268-SIF : Surface delamination of concrete industrial floors
  Chair : Mrs. Valérie POLLET
  
  
• Technical Committee : 269-IAM : Damage Assessment in Consideration of Repair/ Retrofit-Recovery in Concrete and Masonry Structures by Means of Innovative NDT
  Chair : Prof. Tomoki SHIOTANI
  
  
• Technical Committee : 270-CIM : Benchmarking Chloride Ingress Models on Real-life Case Studies: Theory and Practice
  Chair : Prof. Eddie A. B. KOENDERS
  
  
• Technical Committee : 271-ASC : Accelerated laboratory test for the assessment of the durability of materials with respect to salt crystallization
  Chair : Dr. Barbara LUBELLI
  
  
• Technical Committee : 272-PIM : Phase and Interphase behaviour of bituminous Materials
  Chair : Dr Emmanuel CHAILLEUX
  
  
• Technical Committee : 273-RAC : Structural behaviour and innovation of recycled aggregate concrete
  Chair : Prof. Dr. Jianzhuang XIAO
  
  
• Technical Committee : 274-TCE : Testing and characterisation of earth-based building materials and elements
  Chair : Prof. Jean-Claude MOREL
  
  
• Technical Committee : 275-HDB : Hygrothermal behaviour and Durability of Bio-aggregate based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 276-DFC : Digital fabrication with cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 277-LHS : Specifications for testing and evaluation of lime-based repair materials for historic Structures
  Chair : Emer. Prof. Ioanna PAPAYIANNI
  
  
• Technical Committee : 278-CHA : Crack-Healing of Asphalt Pavement Materials
  Chair : Prof. Hassan BAAJ
  
  
• Technical Committee : 279-WMR : Valorisation of Waste and Secondary Materials for Roads
  Chair : Dr. Lily POULIKAKOS
  
  
• Technical Committee : 280-CBE : Multiphase characterisation of cold bitumen emulsion materials
  Chair : Dr. Andrea GRAZIANI
  
  
• Technical Committee : 281-CCC : Carbonation of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 282-CCL : Calcined Clays as Supplementary Cementitious Materials
  Chair : Prof. José Fernando MARTIRENA-HERNANDEZ
  
  
• Technical Committee : 283-CAM : Chloride transport in alkali-activated materials
  Chair : Prof. Arnaud CASTEL
  
  
• Technical Committee : 284-CEC : Controlled expansion of concrete by adding MgO-based expansive agents taking the combined influence of composition and size of concrete elements into consideration
  Chair : Prof. Jiaping LIU
  
  
• Technical Committee : 285-TMS: Test method for concrete durability under combined role of sulphate and chloride ions
  Chair : Prof. Changwen MIAO
  
  
• Technical Committee : 286-GDP: Test Methods for Gas Diffusion in Porous Media
  Chair : Bruno HUET
  
  
• Technical Committee : 287-CCS : Early age and long-term crack width analysis in RC Structures
  Chair : Dr Miguel Ângelo Dias AZENHA
  
  
• Technical Committee : 288-IEC: Impact and Explosion
  Chair : Prof. Marco DI PRISCO
  
  
• Technical Committee : 289-DCM : Long-term durability of structural concretes in marine exposure conditions
  Chair : Prof. Kefei LI
  
  
• Technical Committee : 290-IMC : Durability of Inorganic Matrix Composites used for Strengthening of Masonry Constructions
  Chair : Prof. Maria Antonietta AIELLO
  
  
• Technical Committee : 291-AMC : Use of Agro-Based Materials as Cementitious Additions in Concrete and Cement-Based Materials
  Chair : Prof. Said KENAI
  
  
• Technical Committee : 292-MCC : Mechanical Characterization and Structural design of Textile Reinforced Concrete
  Chair : Prof. Barzin MOBASHER
  
  
• Technical Committee : 293-CCH : Stress Corrosion Cracking and Hydrogen Embrittlement of Concrete-Reinforcing Steels
  Chair : Dr. Javier SANCHEZ MONTERO
  
  
• Technical Committee : 294-MPA : Mechanical properties of alkali-activated concrete
  Chair : Dr. Guang YE
  
  
• Technical Committee : 295-FBB : Fingerprinting bituminous binders using physico-chemical analysis
  Chair : Dr. Bernhard HOFKO
  
  
• Technical Committee : 296-ECS : Assessment of electrochemical methods to study corrosion of steel in concrete
  Chair : Prof. Dr. Sylvia KESSLER
  
  
• Technical Committee : 297-DOC : Degradation of organic coating materials and its relation to concrete durability
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 298-EBD : Test methods to evaluate durability of blended cement pastes against deleterious ions
  Chair : Dr. William WILSON
  
  
• Technical Committee : 299-TES : Thermal energy storage in cementitious composites
  Chair : Dr Jorge SANCHEZ DOLADO
  
  
• Technical Committee : 300-ARM : Alkali-aggregate reaction mitigation
  Chair : Dr. Esperanza MENENDEZ MENDEZ
  
  
• Technical Committee : 301-ASR : Risk assessment of concrete mixture designs with alkali-silica reactive (ASR) aggregates
  Chair : Prof. Jason H. IDEKER
  
  
• Technical Committee : 302- CNC : Carbon-based nanomaterials for multifunctional cementitious matrices
  Chair : Prof. Florence SANCHEZ
  
  
• Technical Committee : 303-PFC : Performance requirements and testing of fresh printable cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 304-ADC : Assessment of Additively Manufactured Concrete Materials and Structures
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 305-PCC : Pumping of concrete
  Chair : Dr Dimitri FEYS
  
  
• Technical Committee : 306-CFR : Concrete during Fire - Reassessment of the framework
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 307-PPB : Physicochemical Effects of Polymers in Bitumen
  Chair : Prof. Hinrich GROTHE
  
  
• Technical Committee : 308-PAR : Performance-based Asphalt Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 309-MCP : Accelerated Mineral Carbonation for the production of construction materials
  Chair : Dr Ruben SNELLINGS
  
  
• Technical Committee : 310-TPT : Tests methods for a reliable characterization of resistance, stiffness and deformation properties of timber joints
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 311-MBC : Magnesia-based binders in concrete
  Chair : Ass. Prof. Paivo KINNUNEN
  
  
• Technical Committee : 312-PHC : Performance testing of hydraulic cements
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 3C : Coordinating committee for concrete technology
  Chair : Prof. Andrzej M. BRANDT
  
  
• Technical Committee : ACP : Active Control of Properties of Fresh and Hardening Cementitious Materials
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : Admin RILEM
  
  
  
• Technical Committee : APD : Alternative Paving Materials - Design and Performance
  Chair : Dr Augusto CANNONE FALCHETTO
  
  
• Technical Committee : APS : Alternative Paving Materials - Sustainability
  Chair : Dr Davide LO PRESTI
  
  
• Technical Committee : BEC : Bio-stabilised earth-based construction: performance-approach for better resilience
  Chair : Dr Ana BRAS
  
  
• Technical Committee : Board of Editors (Materials and Structures)
  
  
  
• Technical Committee : Board of Editors (RILEM Technical Letters)
  
  
  
• Technical Committee : Bureau
  
  
  
• Technical Committee : CSA : Calcium sulfoaluminate-based cement and concrete
  Chair : Prof. Eric BESCHER
  
  
• Technical Committee : CTM
  Chair : Dr Rita ESPOSITO
  
  
• Technical Committee : CUC : Carbon dioxide uptake by concrete during and after service life
  
  
  
• Technical Committee : DAC
  
  
  
• Technical Committee : DCS : Data-driven concrete science
  Chair : Prof. Sandra NUNES
  
  
• Technical Committee : EAC
  
  
  
• Technical Committee : EAC : Educational Activities Committee
  
  
  
• Technical Committee : EHA : Engineered healing of asphalt concrete
  Chair : Dr. Alvaro GARCIA HERNANDEZ
  
  
• Technical Committee : FEE : Fume Emissions Evaluation for Asphalt Materials
  Chair : Prof. Johan BLOM
  
  
• Technical Committee : FHP : Predicting the frost resistance of high-performance concrete structures exposed to numerous freezing and thawing cycles
  
  
  
• Technical Committee : FRP : FRP-concrete bond in structural strengthening and rehabilitation
  Chair : Prof. Nemkumar BANTHIA
  
  
• Technical Committee : FTC : Durability and Service Life of Concrete under the Influence of Freeze-Thaw Cycles combined with Chloride Penetration
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : LPC : Long term performance characteristics of fibre cement composites
  Chair : Prof. Pritpal S. MANGAT
  
  
• Technical Committee : MAE : Mechanical performance and durability assessment of earthen elements and structures
  Chair : Prof. Antonin FABBRI
  
  
• Technical Committee : MCB : Mechanical Characterisation of Bamboo
  Chair : Prof. Kent HARRIES
  
  
• Technical Committee : MCT : Multi-component transport and chemical equilibrium in cement based materials
  Chair : Dr. Björn F. JOHANNESSON
  
  
• Technical Committee : MCW : Modelling of crack initiation and propagation in wood under varying ambient conditions
  
  
  
• Technical Committee : MMS : Modelling and experimental validation of moisture state in bulk cementitious materials and at the steel-concrete interface
  Chair : Prof. Zhidong ZHANG
  
  
• Technical Committee : NDE : Non-destructive evaluation of concrete elements - Updated methods
  
  
  
• Technical Committee : OCM : On-site Corrosion Condition Assessment, Monitoring and Prediction
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : OFS : Optical fiber sensors for civil engineering applications
  Chair : Prof. Christopher LEUNG
  
  
• Technical Committee : PEM : Processing of earth-based materials
  Chair : Dr Emmanuel KEITA
  
  
• Technical Committee : PFS : Physical Aspects of Fracture Scaling
  Chair : Prof. Dr. Jan G. M. VAN MIER
  
  
• Technical Committee : Presidency
  
  
  
• Technical Committee : QFS : Size effect and scaling of quasibrittle fracture
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : RCC : Rolled compacted concrete for pavement applications
  Chair : Dr. Christian PAGLIA
  
  
• Technical Committee : RILEM Association
  
  
  
• Technical Committee : RILEM Youth Council
  
  
  
• Technical Committee : SDM : Scientific Metadata Management of Construction materials
  Chair : Dr Tanja MANNINGER
  
  
• Technical Committee : SHE : Self-healing concrete – Its efficiency and evaluation
  Chair : Prof. Dr. Feng XING
  
  
• Technical Committee : TAC
  
  
  
• Technical Committee : UMW : Upcycling Powder Mineral “Wastes” into Cement Matrices
  Chair : Dr. Antonis KANELLOPOULOS
  
  

Other active RILEM Technical Committees

• Technical Committee : 001-CW : Winter concreting
  
  
  
• Technical Committee : 002-HC : Concrete and reinforced concrete in hot countries
  
  
  
• Technical Committee : 003-TT : Testing methods of timber
  
  
  
• Technical Committee : 004-CDC : Durability of concrete
  
  
  
• Technical Committee : 005-LC : Lightweight concretes
  
  
  
• Technical Committee : 006-PAN : Natural and artificial stones: Methods of testing
  
  
  
• Technical Committee : 007-NDT : Non-destructive tests of concrete
  
  
  
• Technical Committee : 008-SR : Research and testing on synthetic resins in building construction
  
  
  
• Technical Committee : 009-RC : Test and specifications of steel for reinforced and prestressed concrete
  
  
  
• Technical Committee : 010-SC : Statistical control of the quality of concrete
  
  
  
• Technical Committee : 011-A : Admixtures
  
  
  
• Technical Committee : 012-CRC : Concrete reinforcements corrosion
  
  
  
• Technical Committee : 013-MR : Mortars and renderings
  
  
  
• Technical Committee : 014-CPC : Concrete permanent committee
  
  
  
• Technical Committee : 015-PM : Investigation on porosity in building materials
  
  
  
• Technical Committee : 016-C : Investigation on carbonation
  
  
  
• Technical Committee : 017-BM : Bitumens and bituminous materials
  
  
  
• Technical Committee : 018-REF : Refractory concretes
  
  
  
• Technical Committee : 019-FRC : Fibre reinforced cement composites
  Chair : Dr. Amal MAJUMDAR
  
  
• Technical Committee : 020-TBS : Testing building structures in situ
  
  
  
• Technical Committee : 021-IL : Impact loading on building
  
  
  
• Technical Committee : 022-AT : Accelerated tests
  
  
  
• Technical Committee : 023-GP : Gypsum plasters
  
  
  
• Technical Committee : 024-BW : Load-bearing walls and masonry
  
  
  
• Technical Committee : 025-PEM : Preservation of natural stone monuments
  
  
  
• Technical Committee : 026-GM : Granular materials
  
  
  
• Technical Committee : 027-EVS : Evaluation of external vertical façades
  
  
  
• Technical Committee : 028-MIM : Moisture insulating materials
  
  
  
• Technical Committee : 029-PSP : Pore structure and properties of materials
  
  
  
• Technical Committee : 030-TE : Testing equipment
  
  
  
• Technical Committee : 031-PCM : Performance criteria for materials
  
  
  
• Technical Committee : 032-RCA : Resistance of concrete to chemical attack
  
  
  
• Technical Committee : 033-AC : Analysis of fresh and hardened concrete
  
  
  
• Technical Committee : 034-APB : Ageing of polymers in building
  
  
  
• Technical Committee : 035-PMB : Methods of predicting moisture conditions in building materials and components
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 036-RDL : Long-term random dynamic loading of concrete structures
  
  
  
• Technical Committee : 037-DRC : Demolition and reuse of concrete
  
  
  
• Technical Committee : 038-AAR : Ageing, appearance and restoration of materials
  
  
  
• Technical Committee : 039-BH : Winter concreting
  
  
  
• Technical Committee : 040-TPC : Testing of precast concrete elements
  
  
  
• Technical Committee : 041-HOL : Holography in testing models of structures
  
  
  
• Technical Committee : 042-CEA : Properties of concrete at early ages
  
  
  
• Technical Committee : 043-CND : Combined non-destructive testing of concrete
  
  
  
• Technical Committee : 044-PHT : Properties of materials at high temperatures
  
  
  
• Technical Committee : 045-LTO : Long-term observation of structures
  
  
  
• Technical Committee : 046-FST : Fatigue of steel temperature effects
  
  
  
• Technical Committee : 047-SM : Synthetic membranes
  
  
  
• Technical Committee : 048-FC : Testing of ferrocement
  
  
  
• Technical Committee : 049-TFR : Testing methods for fibre reinforced cement-based composites
  
  
  
• Technical Committee : 050-FMC : Fracture mechanics of concrete
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 051-ALC : Light-weight aerated concrete
  
  
  
• Technical Committee : 052-RAC : Resin adherence to concrete
  
  
  
• Technical Committee : 053-MTC : Multi-axial testing of concrete
  
  
  
• Technical Committee : 054-PIC : Polymer impregnated concrete
  
  
  
• Technical Committee : 055-CCA : Corrosion of galvanized steel tap-water piping
  
  
  
• Technical Committee : 056-MHM : Hydrocarbon materials
  
  
  
• Technical Committee : 057-TSB : Testing of timber structures and building boards
  
  
  
• Technical Committee : 058-VPM : Aging of monument stones
  
  
  
• Technical Committee : 059-TPM : Treatment and protection of monuments
  
  
  
• Technical Committee : 060-CSC : Corrosion of steel in concrete
  
  
  
• Technical Committee : 061-SLB : Effects of seismic loading on building materials
  
  
  
• Technical Committee : 062-SFC : Soiling and cleaning of façades
  
  
  
• Technical Committee : 063-LBM : Laterite-based materials
  
  
  
• Technical Committee : 064-BT : Bearing transfers by joints and interfaces
  
  
  
• Technical Committee : 065-MDB : The dynamic behavior of concrete structures
  
  
  
• Technical Committee : 066-BJS : Building joint seals
  
  
  
• Technical Committee : 067-FAB : Use of fly-ash in building
  
  
  
• Technical Committee : 068-MMH : Mathematical modelling of cement hydratation
  
  
  
• Technical Committee : 069-MMC : Mathematical modelling of creep and shrinkage of concrete
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 070-OMD : Optimized mix design of concrete
  
  
  
• Technical Committee : 071-PSL : Prediction of service life of building materials and components
  
  
  
• Technical Committee : 072-SMS : Stochastic methods in material and structural engeneering
  
  
  
• Technical Committee : 073-SBC : Use of siliceous by-products in cement and concrete
  
  
  
• Technical Committee : 074-THT : Test methods for high temperature properties
  
  
  
• Technical Committee : 075-SLR : Single layer roofing
  
  
  
• Technical Committee : 076-LUM : Load bearing masonry
  
  
  
• Technical Committee : 077-RRT : Reciprocal recognition of test results
  
  
  
• Technical Committee : 078-MCA : Recommended practice for aerated concrete based on RILEM testing methods
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 079-PAC : Phase analysis of cement
  
  
  
• Technical Committee : 080-TMS : Tension modulus of prestressing steel stands
  
  
  
• Technical Committee : 081-LCP : Load bearing concrete panels and assemblies
  
  
  
• Technical Committee : 082-PGP : Properties of gypsum plaster
  
  
  
• Technical Committee : 083-CUS : Fundamental mechanical properties of metals
  
  
  
• Technical Committee : 084-AAC : Application of admixtures to concrete
  
  
  
• Technical Committee : 085-TAC : Test methods for chemical admixtures for concrete
  
  
  
• Technical Committee : 086-PCW : Protective coating for wood
  
  
  
• Technical Committee : 087-LAC : Lightweight aggregates for concrete
  
  
  
• Technical Committee : 088-TPP : Testing of plastic pipes
  
  
  
• Technical Committee : 089-FMT : Fractures mechanics of concrete - test methods
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 090-FMA : Fracture mechanics of concrete - applications
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 091-CRL : Guidelines for cement and concrete reference laboratories
  
  
  
• Technical Committee : 092-ECM : Efficiency of concrete mixers
  
  
  
• Technical Committee : 093-ES : Expert systems for materials and structures
  
  
  
• Technical Committee : 094-CHC : Concrete for hot countries
  
  
  
• Technical Committee : 095-PPC : Physical properties of precast concrete elements
  
  
  
• Technical Committee : 096-EB : Earth construction
  
  
  
• Technical Committee : 097-GCR : Applications of geotextiles to crack prevention in roads
  
  
  
• Technical Committee : 098-PDE : Probabilistic methods in experimental studies
  
  
  
• Technical Committee : 099-TRC : Measurement of temperature rise in concrete after setting
  
  
  
• Technical Committee : 100-TSL : Prediction techniques of service life
  
  
  
• Technical Committee : 101-BAT : Bitumens and asphalt testing
  Chair : Mr. Hermann W. FRITZ
  
  
• Technical Committee : 102-AFC : Ageing and durability of fibre concrete
  
  
  
• Technical Committee : 103-MGH : Mechanical and hydraulic testing of geomembranes
  
  
  
• Technical Committee : 104-DCC : Damage classification of concrete structures
  Chair : Prof. Dr. Tibor JAVOR
  
  
• Technical Committee : 105-CPC : Concrete-polymer composites
  
  
  
• Technical Committee : 106-AAR : Alkali-aggregate reaction
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 107-CSP : Creep and shrinkage prediction models
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 108-ICC : Interface between cement paste and concrete constituents
  
  
  
• Technical Committee : 109-TSA : Behaviour of timber structures under seismic action
  
  
  
• Technical Committee : 110-TFM : Application of fracture mechanics to timber structures
  
  
  
• Technical Committee : 111-CST : Behaviour of timber and concrete composite load bearing structures
  
  
  
• Technical Committee : 112-TSC : Creep in timber structures
  
  
  
• Technical Committee : 113-CPT : Test methods for concrete-polymer composites
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 114-CCS : Computer programmes for creep and shrinkage analysis of concrete structures
  Chair : Prof. Ignacio CAROL
  
  
• Technical Committee : 115-HSC : High strength concrete
  
  
  
• Technical Committee : 116-PCD : Permeability of concrete as a criterion of its durability
  Chair : Prof. Dr.-Ing. Hubert Karl HILSDORF
  
  
• Technical Committee : 117-FDC : Freeze-thaw and de-icing resistance of concrete
  
  
  
• Technical Committee : 118-IC : Ice and construction
  
  
  
• Technical Committee : 119-TCE : Avoidance of thermal cracking at early ages
  
  
  
• Technical Committee : 120-MRS : Membrane roofing systems
  
  
  
• Technical Committee : 121-DRG : Guidance for demolition and re-use of concrete and masonry
  
  
  
• Technical Committee : 122-MLC : Microcracking and lifetime performance of concrete
  
  
  
• Technical Committee : 123-MME : Use of microstructural models and expert systems for cementitious materials
  
  
  
• Technical Committee : 124-SRC : Repair strategies for concrete structures damaged by steel corrosion
  
  
  
• Technical Committee : 125-DT : Design by testing
  
  
  
• Technical Committee : 126-IPT : In-place testing of hardened concrete
  Chair : Dr. Nicholas CARINO
  
  
• Technical Committee : 127-MS : Masonry materials and structures
  
  
  
• Technical Committee : 128-MRC : Materials requirements for repair of corrosion damaged reinforced concrete structures
  
  
  
• Technical Committee : 129-MHT : Test methods for mechanical properties of concrete at high temperatures
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 130-CSL : Calculation methods for service life design of concrete structures
  
  
  
• Technical Committee : 131-ONM : Testing Methods for characterizing old and new mortars
  
  
  
• Technical Committee : 132-MGI : Geometrical and mechanical imperfections of metal components and strucures
  
  
  
• Technical Committee : 133-TF : Fracture of timber
  Chair : Prof. Alpo RANTA-MAUNUS
  
  
• Technical Committee : 134-MJP : Characterization of ultimate limit state performance of metal joints
  
  
  
• Technical Committee : 135-MHC : High cycle fatigue behaviour of metallic materials, joints ans structural components
  
  
  
• Technical Committee : 136-NDI : Non-destructive inspection of materials and structures
  
  
  
• Technical Committee : 137-CS : Composite structures
  
  
  
• Technical Committee : 138-MTW : Test methods for thin-walled metal structures and members
  Chair : Dr. Andreas T. WOLF
  
  
• Technical Committee : 139-DBS : Durability of building sealants
  
  
  
• Technical Committee : 140-TSL : Prediction of service life of building materials and components
  Chair : Dr. Christer SJÖSTRÖM
  
  
• Technical Committee : 141-SSM : Stainless steel as building material
  
  
  
• Technical Committee : 142-MCL : Testing of metallic structural materials for determining stress-strain relations under cyclic loading
  
  
  
• Technical Committee : 143-QSC : Quality assessment of sprayed concrete
  
  
  
• Technical Committee : 144-GMP : Geomenbranes - Mechanical and physical testing
  
  
  
• Technical Committee : 145-WSM : Workability of special concrete mixes
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 146-TCF : Tightness of concrete with respect to fluids
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 147-FMB : Fracture mechanics applications to anchorage and bond
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 148-SSC : Test methods for the strain softening response of concrete
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 149-HTS : Diagnosis and repair of historic load-bearing timber structures
  Chair : Prof. Ing. Luca UZIELLI
  
  
• Technical Committee : 150-ECM : Efficiency of concrete mixers
  Chair : Prof. Harald BEITZEL
  
  
• Technical Committee : 151-APC : Adhesion technology in concrete engineering - Physical and chemical aspects
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 152-PBM : Performance of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 153-CEB : Building with earth - Compressed earth block technology
  
  
  
• Technical Committee : 154-EMC : Electrochemical techniques for measuring metallic corrosion in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 155-TCW : Test methods for creep measurements of wooden materials
  
  
  
• Technical Committee : 156-CPD : Durability of concrete polymer composites
  
  
  
• Technical Committee : 157-PRC : Systems to prevent reflective cracking on pavement
  
  
  
• Technical Committee : 158-AHC : The role of admixtures in high performance concrete
  
  
  
• Technical Committee : 159-ETC : Engineering of the interfacial transition zone in cementitious composites
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 160-MLN : Methodology for life prediction of concrete structures in nuclear power plants
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 161-GMC : Modelling the behaviour of concretes in service: a guide for the engineer
  Chair : M. Marcel CHEYREZY
  
  
• Technical Committee : 162-TDF : Test and design methods for steel fibre reinforced concrete
  Chair : Prof. Dr Ir. Lucie VANDEWALLE
  
  
• Technical Committee : 163-TPZ : Interfacial transition zone and properties of transfer
  Chair : Prof. Ginette ARLIGUIE
  
  
• Technical Committee : 164-EBM : Mechanics of earth as a building material
  Chair : M. Ahmed HAKIMI
  
  
• Technical Committee : 165-SRM : Sustainable application of mineral raw materials in construction
  
  
  
• Technical Committee : 166-RMS : Roofing membranes and systems
  Chair : Mr. Walter J. ROSSITER
  
  
• Technical Committee : 167-COM : Characterisation of old mortars with respect to their repair
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 168-MMM : Computer modelling of mechanical behaviour of masonry structures
  Chair : Prof. Gyan PANDE
  
  
• Technical Committee : 169-MTE : Test methods for load transferring metalwork used in timber engineering
  Chair : Prof. Dr.-Ing. Jürgen EHLBECK
  
  
• Technical Committee : 170-CSH : The structure of C-S-H
  Chair : Dr. Alan E. RICHARDSON
  
  
• Technical Committee : 171-ECB : Environmental criteria for building products
  Chair : Prof. Kai ÖDEEN
  
  
• Technical Committee : 172-EDM : Environmental design methods in materials and structural engineering
  Chair : Prof. Asko SARJA
  
  
• Technical Committee : 173-EID : Systematics of the environmental impact database of building materials
  Chair : Mr. Wayne B. TRUSTY
  
  
• Technical Committee : 174-SCC : Self compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 175-SLM : Computer bases on service life methodology
  
  
  
• Technical Committee : 176-IDC : Internal damage of concrete due to frost action
  Chair : Prof. Dr. Max J. SETZER
  
  
• Technical Committee : 177-MDT : Masonry durability and on-site testing
  
  
  
• Technical Committee : 178-TMC : Testing and modelling chloride penetration in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 179-CSD : Data bank of concrete creep and Shrinkage
  Chair : Prof. Harald S. MÜLLER
  
  
• Technical Committee : 180-QIC : Qualitative identification of clinker and cement
  
  
  
• Technical Committee : 181-EAS : Early age shrinkage induced stresses and cracking in cementitious systems
  Chair : Prof. Arnon BENTUR
  
  
• Technical Committee : 182-PEB : Performance testing and evaluation of bituminous materials
  
  
  
• Technical Committee : 183-MIB : Microbial impacts on building materials - Weathering and conservation
  Chair : Prof. Moema RIBAS SILVA
  
  
• Technical Committee : 184-IFE : Industrial floors for withstanding harsh environmental attacks, including repair and maintenance
  Chair : Dr. Peter SEIDLER
  
  
• Technical Committee : 185-ATC : Advanced testing of cement based materials during setting and hardening
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 186-ISA : Internal sulfate attack
  
  
  
• Technical Committee : 187-SOC : Experimental determination of the stress-crack opening curve for concrete in tension
  Chair : Prof. Jaime PLANAS
  
  
• Technical Committee : 188-CSC : Casting of self-compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 189-NEC : Non-destructive evaluation of the 'covercrete' (concrete cover)
  
  
  
• Technical Committee : 190-SBJ : Service life prediction of sealed building and construction joints
  
  
  
• Technical Committee : 191-ARP : Alkali-reactivity and prevention - Assessment, specification and diagnosis of alkali-reactivity
  
  
  
• Technical Committee : 192-ECM : Environment-conscious construction materials and systems
  Chair : Prof. Norimoto KASHINO
  
  
• Technical Committee : 193-RLS : Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements
  Chair : Prof. Benoît BISSONNETTE
  
  
• Technical Committee : 194-TDP : Application of Titanium dioxide photocatalysis to construction materials
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 195-DTD : Recommendation for test methods for autogenous deformation and thermal dilation of early age concrete
  Chair : Dr Tor Arne MARTIUS-HAMMER
  
  
• Technical Committee : 196-ICC : Internal curing of concretes
  Chair : Prof. Konstantin KOVLER
  
  
• Technical Committee : 197-NCM : Nanotechnology in construction materials
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 198-URM : Use of recycled materials in construction
  
  
  
• Technical Committee : 199-CUA : Concrete: use of additions
  Chair : Mr. José Ángel LECHUGA ALBALA
  
  
• Technical Committee : 200-HTC : Mechanical concrete properties at high temperature - Modelling and applications
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 201-TRC : Textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 202-RWD : Use of concrete in radioactive waste disposal facilities
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 203-RHM : Repair mortars for historic masonry
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 204-LTP : Life time performance of materials and structures
  
  
  
• Technical Committee : 205-DSC : Durability of Self-Compacting Concrete
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : 206-ATB : Advanced testing and characterization of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 207-INR : Interpretation of NDT results and assessment of RC structures
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 208-HFC : High performance fibre reinforced cementitious composites
  Chair : Prof. Victor C. LI
  
  
• Technical Committee : 209-RFC : Rheology of cement based materials such as fresh concrete
  Chair : Dr. Ólafur WALLEVIK
  
  
• Technical Committee : 210-CAP : Cracking in asphalt pavements
  Chair : Prof. André A. A. MOLENAAR
  
  
• Technical Committee : 211-PAE : Performance of cement-based materials in aggressive aqueous environments
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 212-ACD : Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 213-MAI : Model assisted integral service life prediction of steel reinforced concrete structures with respect to corrosion induced damage
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 214-CCD : Concrete cracking and its relation to durability: Integrating material properties with structural performance
  Chair : Prof. Jason WEISS
  
  
• Technical Committee : 215-AST : In-situ assessment of structural timber
  Chair : Prof. Dr. Ing. Bohumil KASAL
  
  
• Technical Committee : 216-SAM : Strategies for the assessment of historic masonry structures with NDT
  Chair : Prof. Luigia BINDA
  
  
• Technical Committee : 217-PRE : Progress of recycling in the built environment
  Chair : Prof. Enric VAZQUEZ RAMONICH
  
  
• Technical Committee : 218-SFC : Sonic methods for quality control of fresh cementitious materials
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 219-ACS : Alkali Aggregate Reaction in concrete structures: performance testing and appraisal
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 220-FLM : Modelling of life time of concrete under different types of frost and de-icing salt attack
  
  
  
• Technical Committee : 221-SHC : Self-healing phenomena in cement-based materials
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : 222-SCF : Simulation of fresh concrete flow
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 223-MSC : Masonry strengthening with composite materials
  Chair : Dr. Maria Rosa VALLUZZI
  
  
• Technical Committee : 224-AAM : Alkali activated materials
  Chair : Prof. Jannie S. J. VAN DEVENTER
  
  
• Technical Committee : 225-SAP : Application of super absorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 226-CNM : Reinforced concrete in the context of nuclear waste management
  Chair : Mme Valérie L'HOSTIS
  
  
• Technical Committee : 227-HPB : Physical properties and behaviour of High-Performance Concrete at high temperature
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 228-MPS : Mechanical properties of self-compacting concrete
  Chair : Prof. Kamal KHAYAT
  
  
• Technical Committee : 229-EPE : Electrokinetic processes in civil and environmental engineering
  Chair : Dr. Lisbeth OTTOSEN
  
  
• Technical Committee : 230-PSC : Performance-based specifications and control of concrete durability
  Chair : Prof. Hans D. BEUSHAUSEN
  
  
• Technical Committee : 231-NBM : Nanotechnology-based bituminous materials
  Chair : Prof. Björn BIRGISSON
  
  
• Technical Committee : 232-TDT : Test methods and design of textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 233-FPC : Form pressure generated by fresh concrete
  Chair : Dr Peter H. BILLBERG
  
  
• Technical Committee : 234-DUC : Design procedures for the use of composites in strengthening of reinforced concrete structures
  Chair : Dr. Carlo PELLEGRINO
  
  
• Technical Committee : 235-CTC : Corrosion initiating chloride threshold concentrations in concrete
  Chair : Prof. Luping TANG
  
  
• Technical Committee : 236-BBM : Bio-aggregates based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 237-SIB : Testing and characterization of sustainable innovative bituminous materials and systems
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 238-SCM : Hydration and microstructure of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 239-MCM : On-site measurement of concrete and masonry structures by visualized NDT
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 240-FDS : A framework for durability design of fibre-reinforced strain-hardening cement-based composites (SHCC)
  Chair : Prof. Gideon VAN ZIJL
  
  
• Technical Committee : 241-MCD : Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements
  Chair : Prof. William G. BUTTLAR
  
  
• Technical Committee : 242-MDC : Multi-decade creep and shrinkage of concrete: material model and structural analysis
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 243-SGM : Specifications for non-structural grouting of historic masonries and architectural surfaces
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 244-NUM : Numerical modelling of cement-based materials
  Chair : Prof. Dr. Ir. Klaas VAN BREUGEL
  
  
• Technical Committee : 245-RTE : Reinforcement of Timber Elements in Existing Structures
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 246-TDC : Test methods to determine durability of concrete under combined environmental actions and mechanical load
  Chair : Prof. Yan YAO
  
  
• Technical Committee : 247-DTA : Durability testing of alkali-activated materials
  Chair : Prof. John L. PROVIS
  
  
• Technical Committee : 248-MMB : Methods of measuring moisture in building materials and structures
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 249-ISC : Non destructive in situ strength assessment of concrete
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 250-CSM : Composites for sustainable strengthening of masonry
  Chair : Prof. Gianmarco DE FELICE
  
  
• Technical Committee : 251-SRT : Sulfate resistance testing
  Chair : Dr. Véronique BAROGHEL-BOUNY
  
  
• Technical Committee : 252-CMB : Chemo-Mechanical Characterization of Bituminous Materials
  Chair : Dr. Nicole KRINGOS
  
  
• Technical Committee : 253-MCI : Microorganisms-cementitious materials interactions
  Chair : Prof. Alexandra BERTRON
  
  
• Technical Committee : 254-CMS : Thermal cracking of massive concrete structures
  Chair : Prof. Eduardo M.r. FAIRBAIRN
  
  
• Technical Committee : 255-FRS : Fire resistance of concrete structures repaired with polymer cement mortar
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 256-SPF : Spalling of concrete due to fire: testing and modelling
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 257-DHM : Design and application of hydraulic grouts for repair and strengthening of historic masonry structures
  Chair : Dr. Androniki MILTIADOU-FEZANS
  
  
• Technical Committee : 258-AAA : Avoiding alkali aggregate reactions in concrete - Performance based concept
  Chair : Prof. Børge Johannes WIGUM
  
  
• Technical Committee : 259-ISR : Prognosis of deterioration and loss of serviceability in structures affected by alkali-silica reactions
  Chair : Prof. Victor E. SAOUMA
  
  
• Technical Committee : 260-RSC : Recommendations for use of superabsorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 261-CCF : Creep behavior in Cracked Sections of Fiber Reinforced Concrete
  Chair : Prof. Pedro SERNA ROS
  
  
• Technical Committee : 262-SCI : Characteristics of the steel/concrete interface and their effect on initiation of chloride-induced reinforcement corrosion
  Chair : Prof. Dr Ueli ANGST
  
  
• Technical Committee : 263-EEC : Environmental evaluation of concrete structures toward sustainable construction
  Chair : Prof. Amnon KATZ
  
  
• Technical Committee : 264-RAP : Asphalt Pavement Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 265-TDK : Testing methods for determination of double-K criterion for crack propagation in concrete
  Chair : Prof. Shilang XU
  
  
• Technical Committee : 266-MRP : Measuring Rheological Properties of Cement-based Materials
  Chair : Prof. Dr. Mohammed SONEBI
  
  
• Technical Committee : 267-TRM : Tests for reactivity of supplementary cementitious materials
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 268-SIF : Surface delamination of concrete industrial floors
  Chair : Mrs. Valérie POLLET
  
  
• Technical Committee : 269-IAM : Damage Assessment in Consideration of Repair/ Retrofit-Recovery in Concrete and Masonry Structures by Means of Innovative NDT
  Chair : Prof. Tomoki SHIOTANI
  
  
• Technical Committee : 270-CIM : Benchmarking Chloride Ingress Models on Real-life Case Studies: Theory and Practice
  Chair : Prof. Eddie A. B. KOENDERS
  
  
• Technical Committee : 271-ASC : Accelerated laboratory test for the assessment of the durability of materials with respect to salt crystallization
  Chair : Dr. Barbara LUBELLI
  
  
• Technical Committee : 272-PIM : Phase and Interphase behaviour of bituminous Materials
  Chair : Dr Emmanuel CHAILLEUX
  
  
• Technical Committee : 273-RAC : Structural behaviour and innovation of recycled aggregate concrete
  Chair : Prof. Dr. Jianzhuang XIAO
  
  
• Technical Committee : 274-TCE : Testing and characterisation of earth-based building materials and elements
  Chair : Prof. Jean-Claude MOREL
  
  
• Technical Committee : 275-HDB : Hygrothermal behaviour and Durability of Bio-aggregate based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 276-DFC : Digital fabrication with cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 277-LHS : Specifications for testing and evaluation of lime-based repair materials for historic Structures
  Chair : Emer. Prof. Ioanna PAPAYIANNI
  
  
• Technical Committee : 278-CHA : Crack-Healing of Asphalt Pavement Materials
  Chair : Prof. Hassan BAAJ
  
  
• Technical Committee : 279-WMR : Valorisation of Waste and Secondary Materials for Roads
  Chair : Dr. Lily POULIKAKOS
  
  
• Technical Committee : 280-CBE : Multiphase characterisation of cold bitumen emulsion materials
  Chair : Dr. Andrea GRAZIANI
  
  
• Technical Committee : 281-CCC : Carbonation of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 282-CCL : Calcined Clays as Supplementary Cementitious Materials
  Chair : Prof. José Fernando MARTIRENA-HERNANDEZ
  
  
• Technical Committee : 283-CAM : Chloride transport in alkali-activated materials
  Chair : Prof. Arnaud CASTEL
  
  
• Technical Committee : 284-CEC : Controlled expansion of concrete by adding MgO-based expansive agents taking the combined influence of composition and size of concrete elements into consideration
  Chair : Prof. Jiaping LIU
  
  
• Technical Committee : 285-TMS: Test method for concrete durability under combined role of sulphate and chloride ions
  Chair : Prof. Changwen MIAO
  
  
• Technical Committee : 286-GDP: Test Methods for Gas Diffusion in Porous Media
  Chair : Bruno HUET
  
  
• Technical Committee : 287-CCS : Early age and long-term crack width analysis in RC Structures
  Chair : Dr Miguel Ângelo Dias AZENHA
  
  
• Technical Committee : 288-IEC: Impact and Explosion
  Chair : Prof. Marco DI PRISCO
  
  
• Technical Committee : 289-DCM : Long-term durability of structural concretes in marine exposure conditions
  Chair : Prof. Kefei LI
  
  
• Technical Committee : 290-IMC : Durability of Inorganic Matrix Composites used for Strengthening of Masonry Constructions
  Chair : Prof. Maria Antonietta AIELLO
  
  
• Technical Committee : 291-AMC : Use of Agro-Based Materials as Cementitious Additions in Concrete and Cement-Based Materials
  Chair : Prof. Said KENAI
  
  
• Technical Committee : 292-MCC : Mechanical Characterization and Structural design of Textile Reinforced Concrete
  Chair : Prof. Barzin MOBASHER
  
  
• Technical Committee : 293-CCH : Stress Corrosion Cracking and Hydrogen Embrittlement of Concrete-Reinforcing Steels
  Chair : Dr. Javier SANCHEZ MONTERO
  
  
• Technical Committee : 294-MPA : Mechanical properties of alkali-activated concrete
  Chair : Dr. Guang YE
  
  
• Technical Committee : 295-FBB : Fingerprinting bituminous binders using physico-chemical analysis
  Chair : Dr. Bernhard HOFKO
  
  
• Technical Committee : 296-ECS : Assessment of electrochemical methods to study corrosion of steel in concrete
  Chair : Prof. Dr. Sylvia KESSLER
  
  
• Technical Committee : 297-DOC : Degradation of organic coating materials and its relation to concrete durability
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 298-EBD : Test methods to evaluate durability of blended cement pastes against deleterious ions
  Chair : Dr. William WILSON
  
  
• Technical Committee : 299-TES : Thermal energy storage in cementitious composites
  Chair : Dr Jorge SANCHEZ DOLADO
  
  
• Technical Committee : 300-ARM : Alkali-aggregate reaction mitigation
  Chair : Dr. Esperanza MENENDEZ MENDEZ
  
  
• Technical Committee : 301-ASR : Risk assessment of concrete mixture designs with alkali-silica reactive (ASR) aggregates
  Chair : Prof. Jason H. IDEKER
  
  
• Technical Committee : 302- CNC : Carbon-based nanomaterials for multifunctional cementitious matrices
  Chair : Prof. Florence SANCHEZ
  
  
• Technical Committee : 303-PFC : Performance requirements and testing of fresh printable cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 304-ADC : Assessment of Additively Manufactured Concrete Materials and Structures
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 305-PCC : Pumping of concrete
  Chair : Dr Dimitri FEYS
  
  
• Technical Committee : 306-CFR : Concrete during Fire - Reassessment of the framework
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 307-PPB : Physicochemical Effects of Polymers in Bitumen
  Chair : Prof. Hinrich GROTHE
  
  
• Technical Committee : 308-PAR : Performance-based Asphalt Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 309-MCP : Accelerated Mineral Carbonation for the production of construction materials
  Chair : Dr Ruben SNELLINGS
  
  
• Technical Committee : 310-TPT : Tests methods for a reliable characterization of resistance, stiffness and deformation properties of timber joints
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 311-MBC : Magnesia-based binders in concrete
  Chair : Ass. Prof. Paivo KINNUNEN
  
  
• Technical Committee : 312-PHC : Performance testing of hydraulic cements
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 3C : Coordinating committee for concrete technology
  Chair : Prof. Andrzej M. BRANDT
  
  
• Technical Committee : ACP : Active Control of Properties of Fresh and Hardening Cementitious Materials
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : Admin RILEM
  
  
  
• Technical Committee : APD : Alternative Paving Materials - Design and Performance
  Chair : Dr Augusto CANNONE FALCHETTO
  
  
• Technical Committee : APS : Alternative Paving Materials - Sustainability
  Chair : Dr Davide LO PRESTI
  
  
• Technical Committee : BEC : Bio-stabilised earth-based construction: performance-approach for better resilience
  Chair : Dr Ana BRAS
  
  
• Technical Committee : Board of Editors (Materials and Structures)
  
  
  
• Technical Committee : Board of Editors (RILEM Technical Letters)
  
  
  
• Technical Committee : Bureau
  
  
  
• Technical Committee : CSA : Calcium sulfoaluminate-based cement and concrete
  Chair : Prof. Eric BESCHER
  
  
• Technical Committee : CTM
  Chair : Dr Rita ESPOSITO
  
  
• Technical Committee : CUC : Carbon dioxide uptake by concrete during and after service life
  
  
  
• Technical Committee : DAC
  
  
  
• Technical Committee : DCS : Data-driven concrete science
  Chair : Prof. Sandra NUNES
  
  
• Technical Committee : EAC
  
  
  
• Technical Committee : EAC : Educational Activities Committee
  
  
  
• Technical Committee : EHA : Engineered healing of asphalt concrete
  Chair : Dr. Alvaro GARCIA HERNANDEZ
  
  
• Technical Committee : FEE : Fume Emissions Evaluation for Asphalt Materials
  Chair : Prof. Johan BLOM
  
  
• Technical Committee : FHP : Predicting the frost resistance of high-performance concrete structures exposed to numerous freezing and thawing cycles
  
  
  
• Technical Committee : FRP : FRP-concrete bond in structural strengthening and rehabilitation
  Chair : Prof. Nemkumar BANTHIA
  
  
• Technical Committee : FTC : Durability and Service Life of Concrete under the Influence of Freeze-Thaw Cycles combined with Chloride Penetration
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : LPC : Long term performance characteristics of fibre cement composites
  Chair : Prof. Pritpal S. MANGAT
  
  
• Technical Committee : MAE : Mechanical performance and durability assessment of earthen elements and structures
  Chair : Prof. Antonin FABBRI
  
  
• Technical Committee : MCB : Mechanical Characterisation of Bamboo
  Chair : Prof. Kent HARRIES
  
  
• Technical Committee : MCT : Multi-component transport and chemical equilibrium in cement based materials
  Chair : Dr. Björn F. JOHANNESSON
  
  
• Technical Committee : MCW : Modelling of crack initiation and propagation in wood under varying ambient conditions
  
  
  
• Technical Committee : MMS : Modelling and experimental validation of moisture state in bulk cementitious materials and at the steel-concrete interface
  Chair : Prof. Zhidong ZHANG
  
  
• Technical Committee : NDE : Non-destructive evaluation of concrete elements - Updated methods
  
  
  
• Technical Committee : OCM : On-site Corrosion Condition Assessment, Monitoring and Prediction
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : OFS : Optical fiber sensors for civil engineering applications
  Chair : Prof. Christopher LEUNG
  
  
• Technical Committee : PEM : Processing of earth-based materials
  Chair : Dr Emmanuel KEITA
  
  
• Technical Committee : PFS : Physical Aspects of Fracture Scaling
  Chair : Prof. Dr. Jan G. M. VAN MIER
  
  
• Technical Committee : Presidency
  
  
  
• Technical Committee : QFS : Size effect and scaling of quasibrittle fracture
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : RCC : Rolled compacted concrete for pavement applications
  Chair : Dr. Christian PAGLIA
  
  
• Technical Committee : RILEM Association
  
  
  
• Technical Committee : RILEM Youth Council
  
  
  
• Technical Committee : SDM : Scientific Metadata Management of Construction materials
  Chair : Dr Tanja MANNINGER
  
  
• Technical Committee : SHE : Self-healing concrete – Its efficiency and evaluation
  Chair : Prof. Dr. Feng XING
  
  
• Technical Committee : TAC
  
  
  
• Technical Committee : UMW : Upcycling Powder Mineral “Wastes” into Cement Matrices
  Chair : Dr. Antonis KANELLOPOULOS
  
  

4 - Final report expected

• Technical Committee : 001-CW : Winter concreting
  
  
  
• Technical Committee : 002-HC : Concrete and reinforced concrete in hot countries
  
  
  
• Technical Committee : 003-TT : Testing methods of timber
  
  
  
• Technical Committee : 004-CDC : Durability of concrete
  
  
  
• Technical Committee : 005-LC : Lightweight concretes
  
  
  
• Technical Committee : 006-PAN : Natural and artificial stones: Methods of testing
  
  
  
• Technical Committee : 007-NDT : Non-destructive tests of concrete
  
  
  
• Technical Committee : 008-SR : Research and testing on synthetic resins in building construction
  
  
  
• Technical Committee : 009-RC : Test and specifications of steel for reinforced and prestressed concrete
  
  
  
• Technical Committee : 010-SC : Statistical control of the quality of concrete
  
  
  
• Technical Committee : 011-A : Admixtures
  
  
  
• Technical Committee : 012-CRC : Concrete reinforcements corrosion
  
  
  
• Technical Committee : 013-MR : Mortars and renderings
  
  
  
• Technical Committee : 014-CPC : Concrete permanent committee
  
  
  
• Technical Committee : 015-PM : Investigation on porosity in building materials
  
  
  
• Technical Committee : 016-C : Investigation on carbonation
  
  
  
• Technical Committee : 017-BM : Bitumens and bituminous materials
  
  
  
• Technical Committee : 018-REF : Refractory concretes
  
  
  
• Technical Committee : 019-FRC : Fibre reinforced cement composites
  Chair : Dr. Amal MAJUMDAR
  
  
• Technical Committee : 020-TBS : Testing building structures in situ
  
  
  
• Technical Committee : 021-IL : Impact loading on building
  
  
  
• Technical Committee : 022-AT : Accelerated tests
  
  
  
• Technical Committee : 023-GP : Gypsum plasters
  
  
  
• Technical Committee : 024-BW : Load-bearing walls and masonry
  
  
  
• Technical Committee : 025-PEM : Preservation of natural stone monuments
  
  
  
• Technical Committee : 026-GM : Granular materials
  
  
  
• Technical Committee : 027-EVS : Evaluation of external vertical façades
  
  
  
• Technical Committee : 028-MIM : Moisture insulating materials
  
  
  
• Technical Committee : 029-PSP : Pore structure and properties of materials
  
  
  
• Technical Committee : 030-TE : Testing equipment
  
  
  
• Technical Committee : 031-PCM : Performance criteria for materials
  
  
  
• Technical Committee : 032-RCA : Resistance of concrete to chemical attack
  
  
  
• Technical Committee : 033-AC : Analysis of fresh and hardened concrete
  
  
  
• Technical Committee : 034-APB : Ageing of polymers in building
  
  
  
• Technical Committee : 035-PMB : Methods of predicting moisture conditions in building materials and components
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 036-RDL : Long-term random dynamic loading of concrete structures
  
  
  
• Technical Committee : 037-DRC : Demolition and reuse of concrete
  
  
  
• Technical Committee : 038-AAR : Ageing, appearance and restoration of materials
  
  
  
• Technical Committee : 039-BH : Winter concreting
  
  
  
• Technical Committee : 040-TPC : Testing of precast concrete elements
  
  
  
• Technical Committee : 041-HOL : Holography in testing models of structures
  
  
  
• Technical Committee : 042-CEA : Properties of concrete at early ages
  
  
  
• Technical Committee : 043-CND : Combined non-destructive testing of concrete
  
  
  
• Technical Committee : 044-PHT : Properties of materials at high temperatures
  
  
  
• Technical Committee : 045-LTO : Long-term observation of structures
  
  
  
• Technical Committee : 046-FST : Fatigue of steel temperature effects
  
  
  
• Technical Committee : 047-SM : Synthetic membranes
  
  
  
• Technical Committee : 048-FC : Testing of ferrocement
  
  
  
• Technical Committee : 049-TFR : Testing methods for fibre reinforced cement-based composites
  
  
  
• Technical Committee : 050-FMC : Fracture mechanics of concrete
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 051-ALC : Light-weight aerated concrete
  
  
  
• Technical Committee : 052-RAC : Resin adherence to concrete
  
  
  
• Technical Committee : 053-MTC : Multi-axial testing of concrete
  
  
  
• Technical Committee : 054-PIC : Polymer impregnated concrete
  
  
  
• Technical Committee : 055-CCA : Corrosion of galvanized steel tap-water piping
  
  
  
• Technical Committee : 056-MHM : Hydrocarbon materials
  
  
  
• Technical Committee : 057-TSB : Testing of timber structures and building boards
  
  
  
• Technical Committee : 058-VPM : Aging of monument stones
  
  
  
• Technical Committee : 059-TPM : Treatment and protection of monuments
  
  
  
• Technical Committee : 060-CSC : Corrosion of steel in concrete
  
  
  
• Technical Committee : 061-SLB : Effects of seismic loading on building materials
  
  
  
• Technical Committee : 062-SFC : Soiling and cleaning of façades
  
  
  
• Technical Committee : 063-LBM : Laterite-based materials
  
  
  
• Technical Committee : 064-BT : Bearing transfers by joints and interfaces
  
  
  
• Technical Committee : 065-MDB : The dynamic behavior of concrete structures
  
  
  
• Technical Committee : 066-BJS : Building joint seals
  
  
  
• Technical Committee : 067-FAB : Use of fly-ash in building
  
  
  
• Technical Committee : 068-MMH : Mathematical modelling of cement hydratation
  
  
  
• Technical Committee : 069-MMC : Mathematical modelling of creep and shrinkage of concrete
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 070-OMD : Optimized mix design of concrete
  
  
  
• Technical Committee : 071-PSL : Prediction of service life of building materials and components
  
  
  
• Technical Committee : 072-SMS : Stochastic methods in material and structural engeneering
  
  
  
• Technical Committee : 073-SBC : Use of siliceous by-products in cement and concrete
  
  
  
• Technical Committee : 074-THT : Test methods for high temperature properties
  
  
  
• Technical Committee : 075-SLR : Single layer roofing
  
  
  
• Technical Committee : 076-LUM : Load bearing masonry
  
  
  
• Technical Committee : 077-RRT : Reciprocal recognition of test results
  
  
  
• Technical Committee : 078-MCA : Recommended practice for aerated concrete based on RILEM testing methods
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 079-PAC : Phase analysis of cement
  
  
  
• Technical Committee : 080-TMS : Tension modulus of prestressing steel stands
  
  
  
• Technical Committee : 081-LCP : Load bearing concrete panels and assemblies
  
  
  
• Technical Committee : 082-PGP : Properties of gypsum plaster
  
  
  
• Technical Committee : 083-CUS : Fundamental mechanical properties of metals
  
  
  
• Technical Committee : 084-AAC : Application of admixtures to concrete
  
  
  
• Technical Committee : 085-TAC : Test methods for chemical admixtures for concrete
  
  
  
• Technical Committee : 086-PCW : Protective coating for wood
  
  
  
• Technical Committee : 087-LAC : Lightweight aggregates for concrete
  
  
  
• Technical Committee : 088-TPP : Testing of plastic pipes
  
  
  
• Technical Committee : 089-FMT : Fractures mechanics of concrete - test methods
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 090-FMA : Fracture mechanics of concrete - applications
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 091-CRL : Guidelines for cement and concrete reference laboratories
  
  
  
• Technical Committee : 092-ECM : Efficiency of concrete mixers
  
  
  
• Technical Committee : 093-ES : Expert systems for materials and structures
  
  
  
• Technical Committee : 094-CHC : Concrete for hot countries
  
  
  
• Technical Committee : 095-PPC : Physical properties of precast concrete elements
  
  
  
• Technical Committee : 096-EB : Earth construction
  
  
  
• Technical Committee : 097-GCR : Applications of geotextiles to crack prevention in roads
  
  
  
• Technical Committee : 098-PDE : Probabilistic methods in experimental studies
  
  
  
• Technical Committee : 099-TRC : Measurement of temperature rise in concrete after setting
  
  
  
• Technical Committee : 100-TSL : Prediction techniques of service life
  
  
  
• Technical Committee : 101-BAT : Bitumens and asphalt testing
  Chair : Mr. Hermann W. FRITZ
  
  
• Technical Committee : 102-AFC : Ageing and durability of fibre concrete
  
  
  
• Technical Committee : 103-MGH : Mechanical and hydraulic testing of geomembranes
  
  
  
• Technical Committee : 104-DCC : Damage classification of concrete structures
  Chair : Prof. Dr. Tibor JAVOR
  
  
• Technical Committee : 105-CPC : Concrete-polymer composites
  
  
  
• Technical Committee : 106-AAR : Alkali-aggregate reaction
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 107-CSP : Creep and shrinkage prediction models
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 108-ICC : Interface between cement paste and concrete constituents
  
  
  
• Technical Committee : 109-TSA : Behaviour of timber structures under seismic action
  
  
  
• Technical Committee : 110-TFM : Application of fracture mechanics to timber structures
  
  
  
• Technical Committee : 111-CST : Behaviour of timber and concrete composite load bearing structures
  
  
  
• Technical Committee : 112-TSC : Creep in timber structures
  
  
  
• Technical Committee : 113-CPT : Test methods for concrete-polymer composites
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 114-CCS : Computer programmes for creep and shrinkage analysis of concrete structures
  Chair : Prof. Ignacio CAROL
  
  
• Technical Committee : 115-HSC : High strength concrete
  
  
  
• Technical Committee : 116-PCD : Permeability of concrete as a criterion of its durability
  Chair : Prof. Dr.-Ing. Hubert Karl HILSDORF
  
  
• Technical Committee : 117-FDC : Freeze-thaw and de-icing resistance of concrete
  
  
  
• Technical Committee : 118-IC : Ice and construction
  
  
  
• Technical Committee : 119-TCE : Avoidance of thermal cracking at early ages
  
  
  
• Technical Committee : 120-MRS : Membrane roofing systems
  
  
  
• Technical Committee : 121-DRG : Guidance for demolition and re-use of concrete and masonry
  
  
  
• Technical Committee : 122-MLC : Microcracking and lifetime performance of concrete
  
  
  
• Technical Committee : 123-MME : Use of microstructural models and expert systems for cementitious materials
  
  
  
• Technical Committee : 124-SRC : Repair strategies for concrete structures damaged by steel corrosion
  
  
  
• Technical Committee : 125-DT : Design by testing
  
  
  
• Technical Committee : 126-IPT : In-place testing of hardened concrete
  Chair : Dr. Nicholas CARINO
  
  
• Technical Committee : 127-MS : Masonry materials and structures
  
  
  
• Technical Committee : 128-MRC : Materials requirements for repair of corrosion damaged reinforced concrete structures
  
  
  
• Technical Committee : 129-MHT : Test methods for mechanical properties of concrete at high temperatures
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 130-CSL : Calculation methods for service life design of concrete structures
  
  
  
• Technical Committee : 131-ONM : Testing Methods for characterizing old and new mortars
  
  
  
• Technical Committee : 132-MGI : Geometrical and mechanical imperfections of metal components and strucures
  
  
  
• Technical Committee : 133-TF : Fracture of timber
  Chair : Prof. Alpo RANTA-MAUNUS
  
  
• Technical Committee : 134-MJP : Characterization of ultimate limit state performance of metal joints
  
  
  
• Technical Committee : 135-MHC : High cycle fatigue behaviour of metallic materials, joints ans structural components
  
  
  
• Technical Committee : 136-NDI : Non-destructive inspection of materials and structures
  
  
  
• Technical Committee : 137-CS : Composite structures
  
  
  
• Technical Committee : 138-MTW : Test methods for thin-walled metal structures and members
  Chair : Dr. Andreas T. WOLF
  
  
• Technical Committee : 139-DBS : Durability of building sealants
  
  
  
• Technical Committee : 140-TSL : Prediction of service life of building materials and components
  Chair : Dr. Christer SJÖSTRÖM
  
  
• Technical Committee : 141-SSM : Stainless steel as building material
  
  
  
• Technical Committee : 142-MCL : Testing of metallic structural materials for determining stress-strain relations under cyclic loading
  
  
  
• Technical Committee : 143-QSC : Quality assessment of sprayed concrete
  
  
  
• Technical Committee : 144-GMP : Geomenbranes - Mechanical and physical testing
  
  
  
• Technical Committee : 145-WSM : Workability of special concrete mixes
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 146-TCF : Tightness of concrete with respect to fluids
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 147-FMB : Fracture mechanics applications to anchorage and bond
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 148-SSC : Test methods for the strain softening response of concrete
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 149-HTS : Diagnosis and repair of historic load-bearing timber structures
  Chair : Prof. Ing. Luca UZIELLI
  
  
• Technical Committee : 150-ECM : Efficiency of concrete mixers
  Chair : Prof. Harald BEITZEL
  
  
• Technical Committee : 151-APC : Adhesion technology in concrete engineering - Physical and chemical aspects
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 152-PBM : Performance of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 153-CEB : Building with earth - Compressed earth block technology
  
  
  
• Technical Committee : 154-EMC : Electrochemical techniques for measuring metallic corrosion in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 155-TCW : Test methods for creep measurements of wooden materials
  
  
  
• Technical Committee : 156-CPD : Durability of concrete polymer composites
  
  
  
• Technical Committee : 157-PRC : Systems to prevent reflective cracking on pavement
  
  
  
• Technical Committee : 158-AHC : The role of admixtures in high performance concrete
  
  
  
• Technical Committee : 159-ETC : Engineering of the interfacial transition zone in cementitious composites
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 160-MLN : Methodology for life prediction of concrete structures in nuclear power plants
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 161-GMC : Modelling the behaviour of concretes in service: a guide for the engineer
  Chair : M. Marcel CHEYREZY
  
  
• Technical Committee : 162-TDF : Test and design methods for steel fibre reinforced concrete
  Chair : Prof. Dr Ir. Lucie VANDEWALLE
  
  
• Technical Committee : 163-TPZ : Interfacial transition zone and properties of transfer
  Chair : Prof. Ginette ARLIGUIE
  
  
• Technical Committee : 164-EBM : Mechanics of earth as a building material
  Chair : M. Ahmed HAKIMI
  
  
• Technical Committee : 165-SRM : Sustainable application of mineral raw materials in construction
  
  
  
• Technical Committee : 166-RMS : Roofing membranes and systems
  Chair : Mr. Walter J. ROSSITER
  
  
• Technical Committee : 167-COM : Characterisation of old mortars with respect to their repair
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 168-MMM : Computer modelling of mechanical behaviour of masonry structures
  Chair : Prof. Gyan PANDE
  
  
• Technical Committee : 169-MTE : Test methods for load transferring metalwork used in timber engineering
  Chair : Prof. Dr.-Ing. Jürgen EHLBECK
  
  
• Technical Committee : 170-CSH : The structure of C-S-H
  Chair : Dr. Alan E. RICHARDSON
  
  
• Technical Committee : 171-ECB : Environmental criteria for building products
  Chair : Prof. Kai ÖDEEN
  
  
• Technical Committee : 172-EDM : Environmental design methods in materials and structural engineering
  Chair : Prof. Asko SARJA
  
  
• Technical Committee : 173-EID : Systematics of the environmental impact database of building materials
  Chair : Mr. Wayne B. TRUSTY
  
  
• Technical Committee : 174-SCC : Self compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 175-SLM : Computer bases on service life methodology
  
  
  
• Technical Committee : 176-IDC : Internal damage of concrete due to frost action
  Chair : Prof. Dr. Max J. SETZER
  
  
• Technical Committee : 177-MDT : Masonry durability and on-site testing
  
  
  
• Technical Committee : 178-TMC : Testing and modelling chloride penetration in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 179-CSD : Data bank of concrete creep and Shrinkage
  Chair : Prof. Harald S. MÜLLER
  
  
• Technical Committee : 180-QIC : Qualitative identification of clinker and cement
  
  
  
• Technical Committee : 181-EAS : Early age shrinkage induced stresses and cracking in cementitious systems
  Chair : Prof. Arnon BENTUR
  
  
• Technical Committee : 182-PEB : Performance testing and evaluation of bituminous materials
  
  
  
• Technical Committee : 183-MIB : Microbial impacts on building materials - Weathering and conservation
  Chair : Prof. Moema RIBAS SILVA
  
  
• Technical Committee : 184-IFE : Industrial floors for withstanding harsh environmental attacks, including repair and maintenance
  Chair : Dr. Peter SEIDLER
  
  
• Technical Committee : 185-ATC : Advanced testing of cement based materials during setting and hardening
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 186-ISA : Internal sulfate attack
  
  
  
• Technical Committee : 187-SOC : Experimental determination of the stress-crack opening curve for concrete in tension
  Chair : Prof. Jaime PLANAS
  
  
• Technical Committee : 188-CSC : Casting of self-compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 189-NEC : Non-destructive evaluation of the 'covercrete' (concrete cover)
  
  
  
• Technical Committee : 190-SBJ : Service life prediction of sealed building and construction joints
  
  
  
• Technical Committee : 191-ARP : Alkali-reactivity and prevention - Assessment, specification and diagnosis of alkali-reactivity
  
  
  
• Technical Committee : 192-ECM : Environment-conscious construction materials and systems
  Chair : Prof. Norimoto KASHINO
  
  
• Technical Committee : 193-RLS : Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements
  Chair : Prof. Benoît BISSONNETTE
  
  
• Technical Committee : 194-TDP : Application of Titanium dioxide photocatalysis to construction materials
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 195-DTD : Recommendation for test methods for autogenous deformation and thermal dilation of early age concrete
  Chair : Dr Tor Arne MARTIUS-HAMMER
  
  
• Technical Committee : 196-ICC : Internal curing of concretes
  Chair : Prof. Konstantin KOVLER
  
  
• Technical Committee : 197-NCM : Nanotechnology in construction materials
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 198-URM : Use of recycled materials in construction
  
  
  
• Technical Committee : 199-CUA : Concrete: use of additions
  Chair : Mr. José Ángel LECHUGA ALBALA
  
  
• Technical Committee : 200-HTC : Mechanical concrete properties at high temperature - Modelling and applications
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 201-TRC : Textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 202-RWD : Use of concrete in radioactive waste disposal facilities
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 203-RHM : Repair mortars for historic masonry
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 204-LTP : Life time performance of materials and structures
  
  
  
• Technical Committee : 205-DSC : Durability of Self-Compacting Concrete
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : 206-ATB : Advanced testing and characterization of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 207-INR : Interpretation of NDT results and assessment of RC structures
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 208-HFC : High performance fibre reinforced cementitious composites
  Chair : Prof. Victor C. LI
  
  
• Technical Committee : 209-RFC : Rheology of cement based materials such as fresh concrete
  Chair : Dr. Ólafur WALLEVIK
  
  
• Technical Committee : 210-CAP : Cracking in asphalt pavements
  Chair : Prof. André A. A. MOLENAAR
  
  
• Technical Committee : 211-PAE : Performance of cement-based materials in aggressive aqueous environments
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 212-ACD : Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 213-MAI : Model assisted integral service life prediction of steel reinforced concrete structures with respect to corrosion induced damage
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 214-CCD : Concrete cracking and its relation to durability: Integrating material properties with structural performance
  Chair : Prof. Jason WEISS
  
  
• Technical Committee : 215-AST : In-situ assessment of structural timber
  Chair : Prof. Dr. Ing. Bohumil KASAL
  
  
• Technical Committee : 216-SAM : Strategies for the assessment of historic masonry structures with NDT
  Chair : Prof. Luigia BINDA
  
  
• Technical Committee : 217-PRE : Progress of recycling in the built environment
  Chair : Prof. Enric VAZQUEZ RAMONICH
  
  
• Technical Committee : 218-SFC : Sonic methods for quality control of fresh cementitious materials
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 219-ACS : Alkali Aggregate Reaction in concrete structures: performance testing and appraisal
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 220-FLM : Modelling of life time of concrete under different types of frost and de-icing salt attack
  
  
  
• Technical Committee : 221-SHC : Self-healing phenomena in cement-based materials
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : 222-SCF : Simulation of fresh concrete flow
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 223-MSC : Masonry strengthening with composite materials
  Chair : Dr. Maria Rosa VALLUZZI
  
  
• Technical Committee : 224-AAM : Alkali activated materials
  Chair : Prof. Jannie S. J. VAN DEVENTER
  
  
• Technical Committee : 225-SAP : Application of super absorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 226-CNM : Reinforced concrete in the context of nuclear waste management
  Chair : Mme Valérie L'HOSTIS
  
  
• Technical Committee : 227-HPB : Physical properties and behaviour of High-Performance Concrete at high temperature
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 228-MPS : Mechanical properties of self-compacting concrete
  Chair : Prof. Kamal KHAYAT
  
  
• Technical Committee : 229-EPE : Electrokinetic processes in civil and environmental engineering
  Chair : Dr. Lisbeth OTTOSEN
  
  
• Technical Committee : 230-PSC : Performance-based specifications and control of concrete durability
  Chair : Prof. Hans D. BEUSHAUSEN
  
  
• Technical Committee : 231-NBM : Nanotechnology-based bituminous materials
  Chair : Prof. Björn BIRGISSON
  
  
• Technical Committee : 232-TDT : Test methods and design of textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 233-FPC : Form pressure generated by fresh concrete
  Chair : Dr Peter H. BILLBERG
  
  
• Technical Committee : 234-DUC : Design procedures for the use of composites in strengthening of reinforced concrete structures
  Chair : Dr. Carlo PELLEGRINO
  
  
• Technical Committee : 235-CTC : Corrosion initiating chloride threshold concentrations in concrete
  Chair : Prof. Luping TANG
  
  
• Technical Committee : 236-BBM : Bio-aggregates based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 237-SIB : Testing and characterization of sustainable innovative bituminous materials and systems
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 238-SCM : Hydration and microstructure of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 239-MCM : On-site measurement of concrete and masonry structures by visualized NDT
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 240-FDS : A framework for durability design of fibre-reinforced strain-hardening cement-based composites (SHCC)
  Chair : Prof. Gideon VAN ZIJL
  
  
• Technical Committee : 241-MCD : Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements
  Chair : Prof. William G. BUTTLAR
  
  
• Technical Committee : 242-MDC : Multi-decade creep and shrinkage of concrete: material model and structural analysis
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 243-SGM : Specifications for non-structural grouting of historic masonries and architectural surfaces
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 244-NUM : Numerical modelling of cement-based materials
  Chair : Prof. Dr. Ir. Klaas VAN BREUGEL
  
  
• Technical Committee : 245-RTE : Reinforcement of Timber Elements in Existing Structures
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 246-TDC : Test methods to determine durability of concrete under combined environmental actions and mechanical load
  Chair : Prof. Yan YAO
  
  
• Technical Committee : 247-DTA : Durability testing of alkali-activated materials
  Chair : Prof. John L. PROVIS
  
  
• Technical Committee : 248-MMB : Methods of measuring moisture in building materials and structures
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 249-ISC : Non destructive in situ strength assessment of concrete
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 250-CSM : Composites for sustainable strengthening of masonry
  Chair : Prof. Gianmarco DE FELICE
  
  
• Technical Committee : 251-SRT : Sulfate resistance testing
  Chair : Dr. Véronique BAROGHEL-BOUNY
  
  
• Technical Committee : 252-CMB : Chemo-Mechanical Characterization of Bituminous Materials
  Chair : Dr. Nicole KRINGOS
  
  
• Technical Committee : 253-MCI : Microorganisms-cementitious materials interactions
  Chair : Prof. Alexandra BERTRON
  
  
• Technical Committee : 254-CMS : Thermal cracking of massive concrete structures
  Chair : Prof. Eduardo M.r. FAIRBAIRN
  
  
• Technical Committee : 255-FRS : Fire resistance of concrete structures repaired with polymer cement mortar
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 256-SPF : Spalling of concrete due to fire: testing and modelling
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 257-DHM : Design and application of hydraulic grouts for repair and strengthening of historic masonry structures
  Chair : Dr. Androniki MILTIADOU-FEZANS
  
  
• Technical Committee : 258-AAA : Avoiding alkali aggregate reactions in concrete - Performance based concept
  Chair : Prof. Børge Johannes WIGUM
  
  
• Technical Committee : 259-ISR : Prognosis of deterioration and loss of serviceability in structures affected by alkali-silica reactions
  Chair : Prof. Victor E. SAOUMA
  
  
• Technical Committee : 260-RSC : Recommendations for use of superabsorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 261-CCF : Creep behavior in Cracked Sections of Fiber Reinforced Concrete
  Chair : Prof. Pedro SERNA ROS
  
  
• Technical Committee : 262-SCI : Characteristics of the steel/concrete interface and their effect on initiation of chloride-induced reinforcement corrosion
  Chair : Prof. Dr Ueli ANGST
  
  
• Technical Committee : 263-EEC : Environmental evaluation of concrete structures toward sustainable construction
  Chair : Prof. Amnon KATZ
  
  
• Technical Committee : 264-RAP : Asphalt Pavement Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 265-TDK : Testing methods for determination of double-K criterion for crack propagation in concrete
  Chair : Prof. Shilang XU
  
  
• Technical Committee : 266-MRP : Measuring Rheological Properties of Cement-based Materials
  Chair : Prof. Dr. Mohammed SONEBI
  
  
• Technical Committee : 267-TRM : Tests for reactivity of supplementary cementitious materials
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 268-SIF : Surface delamination of concrete industrial floors
  Chair : Mrs. Valérie POLLET
  
  
• Technical Committee : 269-IAM : Damage Assessment in Consideration of Repair/ Retrofit-Recovery in Concrete and Masonry Structures by Means of Innovative NDT
  Chair : Prof. Tomoki SHIOTANI
  
  
• Technical Committee : 270-CIM : Benchmarking Chloride Ingress Models on Real-life Case Studies: Theory and Practice
  Chair : Prof. Eddie A. B. KOENDERS
  
  
• Technical Committee : 271-ASC : Accelerated laboratory test for the assessment of the durability of materials with respect to salt crystallization
  Chair : Dr. Barbara LUBELLI
  
  
• Technical Committee : 272-PIM : Phase and Interphase behaviour of bituminous Materials
  Chair : Dr Emmanuel CHAILLEUX
  
  
• Technical Committee : 273-RAC : Structural behaviour and innovation of recycled aggregate concrete
  Chair : Prof. Dr. Jianzhuang XIAO
  
  
• Technical Committee : 274-TCE : Testing and characterisation of earth-based building materials and elements
  Chair : Prof. Jean-Claude MOREL
  
  
• Technical Committee : 275-HDB : Hygrothermal behaviour and Durability of Bio-aggregate based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 276-DFC : Digital fabrication with cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 277-LHS : Specifications for testing and evaluation of lime-based repair materials for historic Structures
  Chair : Emer. Prof. Ioanna PAPAYIANNI
  
  
• Technical Committee : 278-CHA : Crack-Healing of Asphalt Pavement Materials
  Chair : Prof. Hassan BAAJ
  
  
• Technical Committee : 279-WMR : Valorisation of Waste and Secondary Materials for Roads
  Chair : Dr. Lily POULIKAKOS
  
  
• Technical Committee : 280-CBE : Multiphase characterisation of cold bitumen emulsion materials
  Chair : Dr. Andrea GRAZIANI
  
  
• Technical Committee : 281-CCC : Carbonation of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 282-CCL : Calcined Clays as Supplementary Cementitious Materials
  Chair : Prof. José Fernando MARTIRENA-HERNANDEZ
  
  
• Technical Committee : 283-CAM : Chloride transport in alkali-activated materials
  Chair : Prof. Arnaud CASTEL
  
  
• Technical Committee : 284-CEC : Controlled expansion of concrete by adding MgO-based expansive agents taking the combined influence of composition and size of concrete elements into consideration
  Chair : Prof. Jiaping LIU
  
  
• Technical Committee : 285-TMS: Test method for concrete durability under combined role of sulphate and chloride ions
  Chair : Prof. Changwen MIAO
  
  
• Technical Committee : 286-GDP: Test Methods for Gas Diffusion in Porous Media
  Chair : Bruno HUET
  
  
• Technical Committee : 287-CCS : Early age and long-term crack width analysis in RC Structures
  Chair : Dr Miguel Ângelo Dias AZENHA
  
  
• Technical Committee : 288-IEC: Impact and Explosion
  Chair : Prof. Marco DI PRISCO
  
  
• Technical Committee : 289-DCM : Long-term durability of structural concretes in marine exposure conditions
  Chair : Prof. Kefei LI
  
  
• Technical Committee : 290-IMC : Durability of Inorganic Matrix Composites used for Strengthening of Masonry Constructions
  Chair : Prof. Maria Antonietta AIELLO
  
  
• Technical Committee : 291-AMC : Use of Agro-Based Materials as Cementitious Additions in Concrete and Cement-Based Materials
  Chair : Prof. Said KENAI
  
  
• Technical Committee : 292-MCC : Mechanical Characterization and Structural design of Textile Reinforced Concrete
  Chair : Prof. Barzin MOBASHER
  
  
• Technical Committee : 293-CCH : Stress Corrosion Cracking and Hydrogen Embrittlement of Concrete-Reinforcing Steels
  Chair : Dr. Javier SANCHEZ MONTERO
  
  
• Technical Committee : 294-MPA : Mechanical properties of alkali-activated concrete
  Chair : Dr. Guang YE
  
  
• Technical Committee : 295-FBB : Fingerprinting bituminous binders using physico-chemical analysis
  Chair : Dr. Bernhard HOFKO
  
  
• Technical Committee : 296-ECS : Assessment of electrochemical methods to study corrosion of steel in concrete
  Chair : Prof. Dr. Sylvia KESSLER
  
  
• Technical Committee : 297-DOC : Degradation of organic coating materials and its relation to concrete durability
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 298-EBD : Test methods to evaluate durability of blended cement pastes against deleterious ions
  Chair : Dr. William WILSON
  
  
• Technical Committee : 299-TES : Thermal energy storage in cementitious composites
  Chair : Dr Jorge SANCHEZ DOLADO
  
  
• Technical Committee : 300-ARM : Alkali-aggregate reaction mitigation
  Chair : Dr. Esperanza MENENDEZ MENDEZ
  
  
• Technical Committee : 301-ASR : Risk assessment of concrete mixture designs with alkali-silica reactive (ASR) aggregates
  Chair : Prof. Jason H. IDEKER
  
  
• Technical Committee : 302- CNC : Carbon-based nanomaterials for multifunctional cementitious matrices
  Chair : Prof. Florence SANCHEZ
  
  
• Technical Committee : 303-PFC : Performance requirements and testing of fresh printable cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 304-ADC : Assessment of Additively Manufactured Concrete Materials and Structures
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 305-PCC : Pumping of concrete
  Chair : Dr Dimitri FEYS
  
  
• Technical Committee : 306-CFR : Concrete during Fire - Reassessment of the framework
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 307-PPB : Physicochemical Effects of Polymers in Bitumen
  Chair : Prof. Hinrich GROTHE
  
  
• Technical Committee : 308-PAR : Performance-based Asphalt Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 309-MCP : Accelerated Mineral Carbonation for the production of construction materials
  Chair : Dr Ruben SNELLINGS
  
  
• Technical Committee : 310-TPT : Tests methods for a reliable characterization of resistance, stiffness and deformation properties of timber joints
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 311-MBC : Magnesia-based binders in concrete
  Chair : Ass. Prof. Paivo KINNUNEN
  
  
• Technical Committee : 312-PHC : Performance testing of hydraulic cements
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 3C : Coordinating committee for concrete technology
  Chair : Prof. Andrzej M. BRANDT
  
  
• Technical Committee : ACP : Active Control of Properties of Fresh and Hardening Cementitious Materials
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : Admin RILEM
  
  
  
• Technical Committee : APD : Alternative Paving Materials - Design and Performance
  Chair : Dr Augusto CANNONE FALCHETTO
  
  
• Technical Committee : APS : Alternative Paving Materials - Sustainability
  Chair : Dr Davide LO PRESTI
  
  
• Technical Committee : BEC : Bio-stabilised earth-based construction: performance-approach for better resilience
  Chair : Dr Ana BRAS
  
  
• Technical Committee : Board of Editors (Materials and Structures)
  
  
  
• Technical Committee : Board of Editors (RILEM Technical Letters)
  
  
  
• Technical Committee : Bureau
  
  
  
• Technical Committee : CSA : Calcium sulfoaluminate-based cement and concrete
  Chair : Prof. Eric BESCHER
  
  
• Technical Committee : CTM
  Chair : Dr Rita ESPOSITO
  
  
• Technical Committee : CUC : Carbon dioxide uptake by concrete during and after service life
  
  
  
• Technical Committee : DAC
  
  
  
• Technical Committee : DCS : Data-driven concrete science
  Chair : Prof. Sandra NUNES
  
  
• Technical Committee : EAC
  
  
  
• Technical Committee : EAC : Educational Activities Committee
  
  
  
• Technical Committee : EHA : Engineered healing of asphalt concrete
  Chair : Dr. Alvaro GARCIA HERNANDEZ
  
  
• Technical Committee : FEE : Fume Emissions Evaluation for Asphalt Materials
  Chair : Prof. Johan BLOM
  
  
• Technical Committee : FHP : Predicting the frost resistance of high-performance concrete structures exposed to numerous freezing and thawing cycles
  
  
  
• Technical Committee : FRP : FRP-concrete bond in structural strengthening and rehabilitation
  Chair : Prof. Nemkumar BANTHIA
  
  
• Technical Committee : FTC : Durability and Service Life of Concrete under the Influence of Freeze-Thaw Cycles combined with Chloride Penetration
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : LPC : Long term performance characteristics of fibre cement composites
  Chair : Prof. Pritpal S. MANGAT
  
  
• Technical Committee : MAE : Mechanical performance and durability assessment of earthen elements and structures
  Chair : Prof. Antonin FABBRI
  
  
• Technical Committee : MCB : Mechanical Characterisation of Bamboo
  Chair : Prof. Kent HARRIES
  
  
• Technical Committee : MCT : Multi-component transport and chemical equilibrium in cement based materials
  Chair : Dr. Björn F. JOHANNESSON
  
  
• Technical Committee : MCW : Modelling of crack initiation and propagation in wood under varying ambient conditions
  
  
  
• Technical Committee : MMS : Modelling and experimental validation of moisture state in bulk cementitious materials and at the steel-concrete interface
  Chair : Prof. Zhidong ZHANG
  
  
• Technical Committee : NDE : Non-destructive evaluation of concrete elements - Updated methods
  
  
  
• Technical Committee : OCM : On-site Corrosion Condition Assessment, Monitoring and Prediction
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : OFS : Optical fiber sensors for civil engineering applications
  Chair : Prof. Christopher LEUNG
  
  
• Technical Committee : PEM : Processing of earth-based materials
  Chair : Dr Emmanuel KEITA
  
  
• Technical Committee : PFS : Physical Aspects of Fracture Scaling
  Chair : Prof. Dr. Jan G. M. VAN MIER
  
  
• Technical Committee : Presidency
  
  
  
• Technical Committee : QFS : Size effect and scaling of quasibrittle fracture
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : RCC : Rolled compacted concrete for pavement applications
  Chair : Dr. Christian PAGLIA
  
  
• Technical Committee : RILEM Association
  
  
  
• Technical Committee : RILEM Youth Council
  
  
  
• Technical Committee : SDM : Scientific Metadata Management of Construction materials
  Chair : Dr Tanja MANNINGER
  
  
• Technical Committee : SHE : Self-healing concrete – Its efficiency and evaluation
  Chair : Prof. Dr. Feng XING
  
  
• Technical Committee : TAC
  
  
  
• Technical Committee : UMW : Upcycling Powder Mineral “Wastes” into Cement Matrices
  Chair : Dr. Antonis KANELLOPOULOS
  
  

RILEM Technical Committees which completed their tasks recently

• Technical Committee : 001-CW : Winter concreting
  
  
  
• Technical Committee : 002-HC : Concrete and reinforced concrete in hot countries
  
  
  
• Technical Committee : 003-TT : Testing methods of timber
  
  
  
• Technical Committee : 004-CDC : Durability of concrete
  
  
  
• Technical Committee : 005-LC : Lightweight concretes
  
  
  
• Technical Committee : 006-PAN : Natural and artificial stones: Methods of testing
  
  
  
• Technical Committee : 007-NDT : Non-destructive tests of concrete
  
  
  
• Technical Committee : 008-SR : Research and testing on synthetic resins in building construction
  
  
  
• Technical Committee : 009-RC : Test and specifications of steel for reinforced and prestressed concrete
  
  
  
• Technical Committee : 010-SC : Statistical control of the quality of concrete
  
  
  
• Technical Committee : 011-A : Admixtures
  
  
  
• Technical Committee : 012-CRC : Concrete reinforcements corrosion
  
  
  
• Technical Committee : 013-MR : Mortars and renderings
  
  
  
• Technical Committee : 014-CPC : Concrete permanent committee
  
  
  
• Technical Committee : 015-PM : Investigation on porosity in building materials
  
  
  
• Technical Committee : 016-C : Investigation on carbonation
  
  
  
• Technical Committee : 017-BM : Bitumens and bituminous materials
  
  
  
• Technical Committee : 018-REF : Refractory concretes
  
  
  
• Technical Committee : 019-FRC : Fibre reinforced cement composites
  Chair : Dr. Amal MAJUMDAR
  
  
• Technical Committee : 020-TBS : Testing building structures in situ
  
  
  
• Technical Committee : 021-IL : Impact loading on building
  
  
  
• Technical Committee : 022-AT : Accelerated tests
  
  
  
• Technical Committee : 023-GP : Gypsum plasters
  
  
  
• Technical Committee : 024-BW : Load-bearing walls and masonry
  
  
  
• Technical Committee : 025-PEM : Preservation of natural stone monuments
  
  
  
• Technical Committee : 026-GM : Granular materials
  
  
  
• Technical Committee : 027-EVS : Evaluation of external vertical façades
  
  
  
• Technical Committee : 028-MIM : Moisture insulating materials
  
  
  
• Technical Committee : 029-PSP : Pore structure and properties of materials
  
  
  
• Technical Committee : 030-TE : Testing equipment
  
  
  
• Technical Committee : 031-PCM : Performance criteria for materials
  
  
  
• Technical Committee : 032-RCA : Resistance of concrete to chemical attack
  
  
  
• Technical Committee : 033-AC : Analysis of fresh and hardened concrete
  
  
  
• Technical Committee : 034-APB : Ageing of polymers in building
  
  
  
• Technical Committee : 035-PMB : Methods of predicting moisture conditions in building materials and components
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 036-RDL : Long-term random dynamic loading of concrete structures
  
  
  
• Technical Committee : 037-DRC : Demolition and reuse of concrete
  
  
  
• Technical Committee : 038-AAR : Ageing, appearance and restoration of materials
  
  
  
• Technical Committee : 039-BH : Winter concreting
  
  
  
• Technical Committee : 040-TPC : Testing of precast concrete elements
  
  
  
• Technical Committee : 041-HOL : Holography in testing models of structures
  
  
  
• Technical Committee : 042-CEA : Properties of concrete at early ages
  
  
  
• Technical Committee : 043-CND : Combined non-destructive testing of concrete
  
  
  
• Technical Committee : 044-PHT : Properties of materials at high temperatures
  
  
  
• Technical Committee : 045-LTO : Long-term observation of structures
  
  
  
• Technical Committee : 046-FST : Fatigue of steel temperature effects
  
  
  
• Technical Committee : 047-SM : Synthetic membranes
  
  
  
• Technical Committee : 048-FC : Testing of ferrocement
  
  
  
• Technical Committee : 049-TFR : Testing methods for fibre reinforced cement-based composites
  
  
  
• Technical Committee : 050-FMC : Fracture mechanics of concrete
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 051-ALC : Light-weight aerated concrete
  
  
  
• Technical Committee : 052-RAC : Resin adherence to concrete
  
  
  
• Technical Committee : 053-MTC : Multi-axial testing of concrete
  
  
  
• Technical Committee : 054-PIC : Polymer impregnated concrete
  
  
  
• Technical Committee : 055-CCA : Corrosion of galvanized steel tap-water piping
  
  
  
• Technical Committee : 056-MHM : Hydrocarbon materials
  
  
  
• Technical Committee : 057-TSB : Testing of timber structures and building boards
  
  
  
• Technical Committee : 058-VPM : Aging of monument stones
  
  
  
• Technical Committee : 059-TPM : Treatment and protection of monuments
  
  
  
• Technical Committee : 060-CSC : Corrosion of steel in concrete
  
  
  
• Technical Committee : 061-SLB : Effects of seismic loading on building materials
  
  
  
• Technical Committee : 062-SFC : Soiling and cleaning of façades
  
  
  
• Technical Committee : 063-LBM : Laterite-based materials
  
  
  
• Technical Committee : 064-BT : Bearing transfers by joints and interfaces
  
  
  
• Technical Committee : 065-MDB : The dynamic behavior of concrete structures
  
  
  
• Technical Committee : 066-BJS : Building joint seals
  
  
  
• Technical Committee : 067-FAB : Use of fly-ash in building
  
  
  
• Technical Committee : 068-MMH : Mathematical modelling of cement hydratation
  
  
  
• Technical Committee : 069-MMC : Mathematical modelling of creep and shrinkage of concrete
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 070-OMD : Optimized mix design of concrete
  
  
  
• Technical Committee : 071-PSL : Prediction of service life of building materials and components
  
  
  
• Technical Committee : 072-SMS : Stochastic methods in material and structural engeneering
  
  
  
• Technical Committee : 073-SBC : Use of siliceous by-products in cement and concrete
  
  
  
• Technical Committee : 074-THT : Test methods for high temperature properties
  
  
  
• Technical Committee : 075-SLR : Single layer roofing
  
  
  
• Technical Committee : 076-LUM : Load bearing masonry
  
  
  
• Technical Committee : 077-RRT : Reciprocal recognition of test results
  
  
  
• Technical Committee : 078-MCA : Recommended practice for aerated concrete based on RILEM testing methods
  Chair : Prof. Dr. Dr.-Ing h.c. Folker H. WITTMANN
  
  
• Technical Committee : 079-PAC : Phase analysis of cement
  
  
  
• Technical Committee : 080-TMS : Tension modulus of prestressing steel stands
  
  
  
• Technical Committee : 081-LCP : Load bearing concrete panels and assemblies
  
  
  
• Technical Committee : 082-PGP : Properties of gypsum plaster
  
  
  
• Technical Committee : 083-CUS : Fundamental mechanical properties of metals
  
  
  
• Technical Committee : 084-AAC : Application of admixtures to concrete
  
  
  
• Technical Committee : 085-TAC : Test methods for chemical admixtures for concrete
  
  
  
• Technical Committee : 086-PCW : Protective coating for wood
  
  
  
• Technical Committee : 087-LAC : Lightweight aggregates for concrete
  
  
  
• Technical Committee : 088-TPP : Testing of plastic pipes
  
  
  
• Technical Committee : 089-FMT : Fractures mechanics of concrete - test methods
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 090-FMA : Fracture mechanics of concrete - applications
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 091-CRL : Guidelines for cement and concrete reference laboratories
  
  
  
• Technical Committee : 092-ECM : Efficiency of concrete mixers
  
  
  
• Technical Committee : 093-ES : Expert systems for materials and structures
  
  
  
• Technical Committee : 094-CHC : Concrete for hot countries
  
  
  
• Technical Committee : 095-PPC : Physical properties of precast concrete elements
  
  
  
• Technical Committee : 096-EB : Earth construction
  
  
  
• Technical Committee : 097-GCR : Applications of geotextiles to crack prevention in roads
  
  
  
• Technical Committee : 098-PDE : Probabilistic methods in experimental studies
  
  
  
• Technical Committee : 099-TRC : Measurement of temperature rise in concrete after setting
  
  
  
• Technical Committee : 100-TSL : Prediction techniques of service life
  
  
  
• Technical Committee : 101-BAT : Bitumens and asphalt testing
  Chair : Mr. Hermann W. FRITZ
  
  
• Technical Committee : 102-AFC : Ageing and durability of fibre concrete
  
  
  
• Technical Committee : 103-MGH : Mechanical and hydraulic testing of geomembranes
  
  
  
• Technical Committee : 104-DCC : Damage classification of concrete structures
  Chair : Prof. Dr. Tibor JAVOR
  
  
• Technical Committee : 105-CPC : Concrete-polymer composites
  
  
  
• Technical Committee : 106-AAR : Alkali-aggregate reaction
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 107-CSP : Creep and shrinkage prediction models
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 108-ICC : Interface between cement paste and concrete constituents
  
  
  
• Technical Committee : 109-TSA : Behaviour of timber structures under seismic action
  
  
  
• Technical Committee : 110-TFM : Application of fracture mechanics to timber structures
  
  
  
• Technical Committee : 111-CST : Behaviour of timber and concrete composite load bearing structures
  
  
  
• Technical Committee : 112-TSC : Creep in timber structures
  
  
  
• Technical Committee : 113-CPT : Test methods for concrete-polymer composites
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 114-CCS : Computer programmes for creep and shrinkage analysis of concrete structures
  Chair : Prof. Ignacio CAROL
  
  
• Technical Committee : 115-HSC : High strength concrete
  
  
  
• Technical Committee : 116-PCD : Permeability of concrete as a criterion of its durability
  Chair : Prof. Dr.-Ing. Hubert Karl HILSDORF
  
  
• Technical Committee : 117-FDC : Freeze-thaw and de-icing resistance of concrete
  
  
  
• Technical Committee : 118-IC : Ice and construction
  
  
  
• Technical Committee : 119-TCE : Avoidance of thermal cracking at early ages
  
  
  
• Technical Committee : 120-MRS : Membrane roofing systems
  
  
  
• Technical Committee : 121-DRG : Guidance for demolition and re-use of concrete and masonry
  
  
  
• Technical Committee : 122-MLC : Microcracking and lifetime performance of concrete
  
  
  
• Technical Committee : 123-MME : Use of microstructural models and expert systems for cementitious materials
  
  
  
• Technical Committee : 124-SRC : Repair strategies for concrete structures damaged by steel corrosion
  
  
  
• Technical Committee : 125-DT : Design by testing
  
  
  
• Technical Committee : 126-IPT : In-place testing of hardened concrete
  Chair : Dr. Nicholas CARINO
  
  
• Technical Committee : 127-MS : Masonry materials and structures
  
  
  
• Technical Committee : 128-MRC : Materials requirements for repair of corrosion damaged reinforced concrete structures
  
  
  
• Technical Committee : 129-MHT : Test methods for mechanical properties of concrete at high temperatures
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 130-CSL : Calculation methods for service life design of concrete structures
  
  
  
• Technical Committee : 131-ONM : Testing Methods for characterizing old and new mortars
  
  
  
• Technical Committee : 132-MGI : Geometrical and mechanical imperfections of metal components and strucures
  
  
  
• Technical Committee : 133-TF : Fracture of timber
  Chair : Prof. Alpo RANTA-MAUNUS
  
  
• Technical Committee : 134-MJP : Characterization of ultimate limit state performance of metal joints
  
  
  
• Technical Committee : 135-MHC : High cycle fatigue behaviour of metallic materials, joints ans structural components
  
  
  
• Technical Committee : 136-NDI : Non-destructive inspection of materials and structures
  
  
  
• Technical Committee : 137-CS : Composite structures
  
  
  
• Technical Committee : 138-MTW : Test methods for thin-walled metal structures and members
  Chair : Dr. Andreas T. WOLF
  
  
• Technical Committee : 139-DBS : Durability of building sealants
  
  
  
• Technical Committee : 140-TSL : Prediction of service life of building materials and components
  Chair : Dr. Christer SJÖSTRÖM
  
  
• Technical Committee : 141-SSM : Stainless steel as building material
  
  
  
• Technical Committee : 142-MCL : Testing of metallic structural materials for determining stress-strain relations under cyclic loading
  
  
  
• Technical Committee : 143-QSC : Quality assessment of sprayed concrete
  
  
  
• Technical Committee : 144-GMP : Geomenbranes - Mechanical and physical testing
  
  
  
• Technical Committee : 145-WSM : Workability of special concrete mixes
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 146-TCF : Tightness of concrete with respect to fluids
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 147-FMB : Fracture mechanics applications to anchorage and bond
  Chair : Dr Lennart ELFGREN
  
  
• Technical Committee : 148-SSC : Test methods for the strain softening response of concrete
  Chair : Prof. Dr. Surendra P. SHAH
  
  
• Technical Committee : 149-HTS : Diagnosis and repair of historic load-bearing timber structures
  Chair : Prof. Ing. Luca UZIELLI
  
  
• Technical Committee : 150-ECM : Efficiency of concrete mixers
  Chair : Prof. Harald BEITZEL
  
  
• Technical Committee : 151-APC : Adhesion technology in concrete engineering - Physical and chemical aspects
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 152-PBM : Performance of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 153-CEB : Building with earth - Compressed earth block technology
  
  
  
• Technical Committee : 154-EMC : Electrochemical techniques for measuring metallic corrosion in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 155-TCW : Test methods for creep measurements of wooden materials
  
  
  
• Technical Committee : 156-CPD : Durability of concrete polymer composites
  
  
  
• Technical Committee : 157-PRC : Systems to prevent reflective cracking on pavement
  
  
  
• Technical Committee : 158-AHC : The role of admixtures in high performance concrete
  
  
  
• Technical Committee : 159-ETC : Engineering of the interfacial transition zone in cementitious composites
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 160-MLN : Methodology for life prediction of concrete structures in nuclear power plants
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 161-GMC : Modelling the behaviour of concretes in service: a guide for the engineer
  Chair : M. Marcel CHEYREZY
  
  
• Technical Committee : 162-TDF : Test and design methods for steel fibre reinforced concrete
  Chair : Prof. Dr Ir. Lucie VANDEWALLE
  
  
• Technical Committee : 163-TPZ : Interfacial transition zone and properties of transfer
  Chair : Prof. Ginette ARLIGUIE
  
  
• Technical Committee : 164-EBM : Mechanics of earth as a building material
  Chair : M. Ahmed HAKIMI
  
  
• Technical Committee : 165-SRM : Sustainable application of mineral raw materials in construction
  
  
  
• Technical Committee : 166-RMS : Roofing membranes and systems
  Chair : Mr. Walter J. ROSSITER
  
  
• Technical Committee : 167-COM : Characterisation of old mortars with respect to their repair
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 168-MMM : Computer modelling of mechanical behaviour of masonry structures
  Chair : Prof. Gyan PANDE
  
  
• Technical Committee : 169-MTE : Test methods for load transferring metalwork used in timber engineering
  Chair : Prof. Dr.-Ing. Jürgen EHLBECK
  
  
• Technical Committee : 170-CSH : The structure of C-S-H
  Chair : Dr. Alan E. RICHARDSON
  
  
• Technical Committee : 171-ECB : Environmental criteria for building products
  Chair : Prof. Kai ÖDEEN
  
  
• Technical Committee : 172-EDM : Environmental design methods in materials and structural engineering
  Chair : Prof. Asko SARJA
  
  
• Technical Committee : 173-EID : Systematics of the environmental impact database of building materials
  Chair : Mr. Wayne B. TRUSTY
  
  
• Technical Committee : 174-SCC : Self compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 175-SLM : Computer bases on service life methodology
  
  
  
• Technical Committee : 176-IDC : Internal damage of concrete due to frost action
  Chair : Prof. Dr. Max J. SETZER
  
  
• Technical Committee : 177-MDT : Masonry durability and on-site testing
  
  
  
• Technical Committee : 178-TMC : Testing and modelling chloride penetration in concrete
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 179-CSD : Data bank of concrete creep and Shrinkage
  Chair : Prof. Harald S. MÜLLER
  
  
• Technical Committee : 180-QIC : Qualitative identification of clinker and cement
  
  
  
• Technical Committee : 181-EAS : Early age shrinkage induced stresses and cracking in cementitious systems
  Chair : Prof. Arnon BENTUR
  
  
• Technical Committee : 182-PEB : Performance testing and evaluation of bituminous materials
  
  
  
• Technical Committee : 183-MIB : Microbial impacts on building materials - Weathering and conservation
  Chair : Prof. Moema RIBAS SILVA
  
  
• Technical Committee : 184-IFE : Industrial floors for withstanding harsh environmental attacks, including repair and maintenance
  Chair : Dr. Peter SEIDLER
  
  
• Technical Committee : 185-ATC : Advanced testing of cement based materials during setting and hardening
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 186-ISA : Internal sulfate attack
  
  
  
• Technical Committee : 187-SOC : Experimental determination of the stress-crack opening curve for concrete in tension
  Chair : Prof. Jaime PLANAS
  
  
• Technical Committee : 188-CSC : Casting of self-compacting concrete
  Chair : Dr Åke SKARENDAHL
  
  
• Technical Committee : 189-NEC : Non-destructive evaluation of the 'covercrete' (concrete cover)
  
  
  
• Technical Committee : 190-SBJ : Service life prediction of sealed building and construction joints
  
  
  
• Technical Committee : 191-ARP : Alkali-reactivity and prevention - Assessment, specification and diagnosis of alkali-reactivity
  
  
  
• Technical Committee : 192-ECM : Environment-conscious construction materials and systems
  Chair : Prof. Norimoto KASHINO
  
  
• Technical Committee : 193-RLS : Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements
  Chair : Prof. Benoît BISSONNETTE
  
  
• Technical Committee : 194-TDP : Application of Titanium dioxide photocatalysis to construction materials
  Chair : Prof. Dr. Yoshihiko OHAMA
  
  
• Technical Committee : 195-DTD : Recommendation for test methods for autogenous deformation and thermal dilation of early age concrete
  Chair : Dr Tor Arne MARTIUS-HAMMER
  
  
• Technical Committee : 196-ICC : Internal curing of concretes
  Chair : Prof. Konstantin KOVLER
  
  
• Technical Committee : 197-NCM : Nanotechnology in construction materials
  Chair : Prof. Dr. Peter J. M. BARTOS
  
  
• Technical Committee : 198-URM : Use of recycled materials in construction
  
  
  
• Technical Committee : 199-CUA : Concrete: use of additions
  Chair : Mr. José Ángel LECHUGA ALBALA
  
  
• Technical Committee : 200-HTC : Mechanical concrete properties at high temperature - Modelling and applications
  Chair : Univ. Prof. Dr. Ulrich SCHNEIDER
  
  
• Technical Committee : 201-TRC : Textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 202-RWD : Use of concrete in radioactive waste disposal facilities
  Chair : Dr. Dan J. NAUS
  
  
• Technical Committee : 203-RHM : Repair mortars for historic masonry
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 204-LTP : Life time performance of materials and structures
  
  
  
• Technical Committee : 205-DSC : Durability of Self-Compacting Concrete
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : 206-ATB : Advanced testing and characterization of bituminous materials
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 207-INR : Interpretation of NDT results and assessment of RC structures
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 208-HFC : High performance fibre reinforced cementitious composites
  Chair : Prof. Victor C. LI
  
  
• Technical Committee : 209-RFC : Rheology of cement based materials such as fresh concrete
  Chair : Dr. Ólafur WALLEVIK
  
  
• Technical Committee : 210-CAP : Cracking in asphalt pavements
  Chair : Prof. André A. A. MOLENAAR
  
  
• Technical Committee : 211-PAE : Performance of cement-based materials in aggressive aqueous environments
  Chair : Prof. Mark G. ALEXANDER
  
  
• Technical Committee : 212-ACD : Acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 213-MAI : Model assisted integral service life prediction of steel reinforced concrete structures with respect to corrosion induced damage
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : 214-CCD : Concrete cracking and its relation to durability: Integrating material properties with structural performance
  Chair : Prof. Jason WEISS
  
  
• Technical Committee : 215-AST : In-situ assessment of structural timber
  Chair : Prof. Dr. Ing. Bohumil KASAL
  
  
• Technical Committee : 216-SAM : Strategies for the assessment of historic masonry structures with NDT
  Chair : Prof. Luigia BINDA
  
  
• Technical Committee : 217-PRE : Progress of recycling in the built environment
  Chair : Prof. Enric VAZQUEZ RAMONICH
  
  
• Technical Committee : 218-SFC : Sonic methods for quality control of fresh cementitious materials
  Chair : Prof. Dr.-Ing. Hans W. REINHARDT
  
  
• Technical Committee : 219-ACS : Alkali Aggregate Reaction in concrete structures: performance testing and appraisal
  Chair : Dr. Philip NIXON
  
  
• Technical Committee : 220-FLM : Modelling of life time of concrete under different types of frost and de-icing salt attack
  
  
  
• Technical Committee : 221-SHC : Self-healing phenomena in cement-based materials
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : 222-SCF : Simulation of fresh concrete flow
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 223-MSC : Masonry strengthening with composite materials
  Chair : Dr. Maria Rosa VALLUZZI
  
  
• Technical Committee : 224-AAM : Alkali activated materials
  Chair : Prof. Jannie S. J. VAN DEVENTER
  
  
• Technical Committee : 225-SAP : Application of super absorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 226-CNM : Reinforced concrete in the context of nuclear waste management
  Chair : Mme Valérie L'HOSTIS
  
  
• Technical Committee : 227-HPB : Physical properties and behaviour of High-Performance Concrete at high temperature
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 228-MPS : Mechanical properties of self-compacting concrete
  Chair : Prof. Kamal KHAYAT
  
  
• Technical Committee : 229-EPE : Electrokinetic processes in civil and environmental engineering
  Chair : Dr. Lisbeth OTTOSEN
  
  
• Technical Committee : 230-PSC : Performance-based specifications and control of concrete durability
  Chair : Prof. Hans D. BEUSHAUSEN
  
  
• Technical Committee : 231-NBM : Nanotechnology-based bituminous materials
  Chair : Prof. Björn BIRGISSON
  
  
• Technical Committee : 232-TDT : Test methods and design of textile reinforced concrete
  Chair : Prof. Dr.-Ing. Wolfgang BRAMESHUBER
  
  
• Technical Committee : 233-FPC : Form pressure generated by fresh concrete
  Chair : Dr Peter H. BILLBERG
  
  
• Technical Committee : 234-DUC : Design procedures for the use of composites in strengthening of reinforced concrete structures
  Chair : Dr. Carlo PELLEGRINO
  
  
• Technical Committee : 235-CTC : Corrosion initiating chloride threshold concentrations in concrete
  Chair : Prof. Luping TANG
  
  
• Technical Committee : 236-BBM : Bio-aggregates based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 237-SIB : Testing and characterization of sustainable innovative bituminous materials and systems
  Chair : Prof. Dr. Manfred N. PARTL
  
  
• Technical Committee : 238-SCM : Hydration and microstructure of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 239-MCM : On-site measurement of concrete and masonry structures by visualized NDT
  Chair : Prof. Masayasu OHTSU
  
  
• Technical Committee : 240-FDS : A framework for durability design of fibre-reinforced strain-hardening cement-based composites (SHCC)
  Chair : Prof. Gideon VAN ZIJL
  
  
• Technical Committee : 241-MCD : Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements
  Chair : Prof. William G. BUTTLAR
  
  
• Technical Committee : 242-MDC : Multi-decade creep and shrinkage of concrete: material model and structural analysis
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : 243-SGM : Specifications for non-structural grouting of historic masonries and architectural surfaces
  Chair : Dr. Caspar J.w.p. GROOT
  
  
• Technical Committee : 244-NUM : Numerical modelling of cement-based materials
  Chair : Prof. Dr. Ir. Klaas VAN BREUGEL
  
  
• Technical Committee : 245-RTE : Reinforcement of Timber Elements in Existing Structures
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 246-TDC : Test methods to determine durability of concrete under combined environmental actions and mechanical load
  Chair : Prof. Yan YAO
  
  
• Technical Committee : 247-DTA : Durability testing of alkali-activated materials
  Chair : Prof. John L. PROVIS
  
  
• Technical Committee : 248-MMB : Methods of measuring moisture in building materials and structures
  Chair : Prof. Lars-Olof NILSSON
  
  
• Technical Committee : 249-ISC : Non destructive in situ strength assessment of concrete
  Chair : Prof. Denys BREYSSE
  
  
• Technical Committee : 250-CSM : Composites for sustainable strengthening of masonry
  Chair : Prof. Gianmarco DE FELICE
  
  
• Technical Committee : 251-SRT : Sulfate resistance testing
  Chair : Dr. Véronique BAROGHEL-BOUNY
  
  
• Technical Committee : 252-CMB : Chemo-Mechanical Characterization of Bituminous Materials
  Chair : Dr. Nicole KRINGOS
  
  
• Technical Committee : 253-MCI : Microorganisms-cementitious materials interactions
  Chair : Prof. Alexandra BERTRON
  
  
• Technical Committee : 254-CMS : Thermal cracking of massive concrete structures
  Chair : Prof. Eduardo M.r. FAIRBAIRN
  
  
• Technical Committee : 255-FRS : Fire resistance of concrete structures repaired with polymer cement mortar
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 256-SPF : Spalling of concrete due to fire: testing and modelling
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 257-DHM : Design and application of hydraulic grouts for repair and strengthening of historic masonry structures
  Chair : Dr. Androniki MILTIADOU-FEZANS
  
  
• Technical Committee : 258-AAA : Avoiding alkali aggregate reactions in concrete - Performance based concept
  Chair : Prof. Børge Johannes WIGUM
  
  
• Technical Committee : 259-ISR : Prognosis of deterioration and loss of serviceability in structures affected by alkali-silica reactions
  Chair : Prof. Victor E. SAOUMA
  
  
• Technical Committee : 260-RSC : Recommendations for use of superabsorbent polymers in concrete construction
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 261-CCF : Creep behavior in Cracked Sections of Fiber Reinforced Concrete
  Chair : Prof. Pedro SERNA ROS
  
  
• Technical Committee : 262-SCI : Characteristics of the steel/concrete interface and their effect on initiation of chloride-induced reinforcement corrosion
  Chair : Prof. Dr Ueli ANGST
  
  
• Technical Committee : 263-EEC : Environmental evaluation of concrete structures toward sustainable construction
  Chair : Prof. Amnon KATZ
  
  
• Technical Committee : 264-RAP : Asphalt Pavement Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 265-TDK : Testing methods for determination of double-K criterion for crack propagation in concrete
  Chair : Prof. Shilang XU
  
  
• Technical Committee : 266-MRP : Measuring Rheological Properties of Cement-based Materials
  Chair : Prof. Dr. Mohammed SONEBI
  
  
• Technical Committee : 267-TRM : Tests for reactivity of supplementary cementitious materials
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 268-SIF : Surface delamination of concrete industrial floors
  Chair : Mrs. Valérie POLLET
  
  
• Technical Committee : 269-IAM : Damage Assessment in Consideration of Repair/ Retrofit-Recovery in Concrete and Masonry Structures by Means of Innovative NDT
  Chair : Prof. Tomoki SHIOTANI
  
  
• Technical Committee : 270-CIM : Benchmarking Chloride Ingress Models on Real-life Case Studies: Theory and Practice
  Chair : Prof. Eddie A. B. KOENDERS
  
  
• Technical Committee : 271-ASC : Accelerated laboratory test for the assessment of the durability of materials with respect to salt crystallization
  Chair : Dr. Barbara LUBELLI
  
  
• Technical Committee : 272-PIM : Phase and Interphase behaviour of bituminous Materials
  Chair : Dr Emmanuel CHAILLEUX
  
  
• Technical Committee : 273-RAC : Structural behaviour and innovation of recycled aggregate concrete
  Chair : Prof. Dr. Jianzhuang XIAO
  
  
• Technical Committee : 274-TCE : Testing and characterisation of earth-based building materials and elements
  Chair : Prof. Jean-Claude MOREL
  
  
• Technical Committee : 275-HDB : Hygrothermal behaviour and Durability of Bio-aggregate based building materials
  Chair : Prof. Sofiane AMZIANE
  
  
• Technical Committee : 276-DFC : Digital fabrication with cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 277-LHS : Specifications for testing and evaluation of lime-based repair materials for historic Structures
  Chair : Emer. Prof. Ioanna PAPAYIANNI
  
  
• Technical Committee : 278-CHA : Crack-Healing of Asphalt Pavement Materials
  Chair : Prof. Hassan BAAJ
  
  
• Technical Committee : 279-WMR : Valorisation of Waste and Secondary Materials for Roads
  Chair : Dr. Lily POULIKAKOS
  
  
• Technical Committee : 280-CBE : Multiphase characterisation of cold bitumen emulsion materials
  Chair : Dr. Andrea GRAZIANI
  
  
• Technical Committee : 281-CCC : Carbonation of concrete with supplementary cementitious materials
  Chair : Prof. Nele DE BELIE
  
  
• Technical Committee : 282-CCL : Calcined Clays as Supplementary Cementitious Materials
  Chair : Prof. José Fernando MARTIRENA-HERNANDEZ
  
  
• Technical Committee : 283-CAM : Chloride transport in alkali-activated materials
  Chair : Prof. Arnaud CASTEL
  
  
• Technical Committee : 284-CEC : Controlled expansion of concrete by adding MgO-based expansive agents taking the combined influence of composition and size of concrete elements into consideration
  Chair : Prof. Jiaping LIU
  
  
• Technical Committee : 285-TMS: Test method for concrete durability under combined role of sulphate and chloride ions
  Chair : Prof. Changwen MIAO
  
  
• Technical Committee : 286-GDP: Test Methods for Gas Diffusion in Porous Media
  Chair : Bruno HUET
  
  
• Technical Committee : 287-CCS : Early age and long-term crack width analysis in RC Structures
  Chair : Dr Miguel Ângelo Dias AZENHA
  
  
• Technical Committee : 288-IEC: Impact and Explosion
  Chair : Prof. Marco DI PRISCO
  
  
• Technical Committee : 289-DCM : Long-term durability of structural concretes in marine exposure conditions
  Chair : Prof. Kefei LI
  
  
• Technical Committee : 290-IMC : Durability of Inorganic Matrix Composites used for Strengthening of Masonry Constructions
  Chair : Prof. Maria Antonietta AIELLO
  
  
• Technical Committee : 291-AMC : Use of Agro-Based Materials as Cementitious Additions in Concrete and Cement-Based Materials
  Chair : Prof. Said KENAI
  
  
• Technical Committee : 292-MCC : Mechanical Characterization and Structural design of Textile Reinforced Concrete
  Chair : Prof. Barzin MOBASHER
  
  
• Technical Committee : 293-CCH : Stress Corrosion Cracking and Hydrogen Embrittlement of Concrete-Reinforcing Steels
  Chair : Dr. Javier SANCHEZ MONTERO
  
  
• Technical Committee : 294-MPA : Mechanical properties of alkali-activated concrete
  Chair : Dr. Guang YE
  
  
• Technical Committee : 295-FBB : Fingerprinting bituminous binders using physico-chemical analysis
  Chair : Dr. Bernhard HOFKO
  
  
• Technical Committee : 296-ECS : Assessment of electrochemical methods to study corrosion of steel in concrete
  Chair : Prof. Dr. Sylvia KESSLER
  
  
• Technical Committee : 297-DOC : Degradation of organic coating materials and its relation to concrete durability
  Chair : Prof. Takafumi NOGUCHI
  
  
• Technical Committee : 298-EBD : Test methods to evaluate durability of blended cement pastes against deleterious ions
  Chair : Dr. William WILSON
  
  
• Technical Committee : 299-TES : Thermal energy storage in cementitious composites
  Chair : Dr Jorge SANCHEZ DOLADO
  
  
• Technical Committee : 300-ARM : Alkali-aggregate reaction mitigation
  Chair : Dr. Esperanza MENENDEZ MENDEZ
  
  
• Technical Committee : 301-ASR : Risk assessment of concrete mixture designs with alkali-silica reactive (ASR) aggregates
  Chair : Prof. Jason H. IDEKER
  
  
• Technical Committee : 302- CNC : Carbon-based nanomaterials for multifunctional cementitious matrices
  Chair : Prof. Florence SANCHEZ
  
  
• Technical Committee : 303-PFC : Performance requirements and testing of fresh printable cement-based materials
  Chair : Dr Nicolas ROUSSEL
  
  
• Technical Committee : 304-ADC : Assessment of Additively Manufactured Concrete Materials and Structures
  Chair : Prof. Dr.-Ing. Viktor MECHTCHERINE
  
  
• Technical Committee : 305-PCC : Pumping of concrete
  Chair : Dr Dimitri FEYS
  
  
• Technical Committee : 306-CFR : Concrete during Fire - Reassessment of the framework
  Chair : Dr. Pierre PIMIENTA
  
  
• Technical Committee : 307-PPB : Physicochemical Effects of Polymers in Bitumen
  Chair : Prof. Hinrich GROTHE
  
  
• Technical Committee : 308-PAR : Performance-based Asphalt Recycling
  Chair : Dr. Gabriele TEBALDI
  
  
• Technical Committee : 309-MCP : Accelerated Mineral Carbonation for the production of construction materials
  Chair : Dr Ruben SNELLINGS
  
  
• Technical Committee : 310-TPT : Tests methods for a reliable characterization of resistance, stiffness and deformation properties of timber joints
  Chair : Dr. Jorge BRANCO
  
  
• Technical Committee : 311-MBC : Magnesia-based binders in concrete
  Chair : Ass. Prof. Paivo KINNUNEN
  
  
• Technical Committee : 312-PHC : Performance testing of hydraulic cements
  Chair : Prof. Karen SCRIVENER
  
  
• Technical Committee : 3C : Coordinating committee for concrete technology
  Chair : Prof. Andrzej M. BRANDT
  
  
• Technical Committee : ACP : Active Control of Properties of Fresh and Hardening Cementitious Materials
  Chair : Prof. Dr. Ir. Geert DE SCHUTTER
  
  
• Technical Committee : Admin RILEM
  
  
  
• Technical Committee : APD : Alternative Paving Materials - Design and Performance
  Chair : Dr Augusto CANNONE FALCHETTO
  
  
• Technical Committee : APS : Alternative Paving Materials - Sustainability
  Chair : Dr Davide LO PRESTI
  
  
• Technical Committee : BEC : Bio-stabilised earth-based construction: performance-approach for better resilience
  Chair : Dr Ana BRAS
  
  
• Technical Committee : Board of Editors (Materials and Structures)
  
  
  
• Technical Committee : Board of Editors (RILEM Technical Letters)
  
  
  
• Technical Committee : Bureau
  
  
  
• Technical Committee : CSA : Calcium sulfoaluminate-based cement and concrete
  Chair : Prof. Eric BESCHER
  
  
• Technical Committee : CTM
  Chair : Dr Rita ESPOSITO
  
  
• Technical Committee : CUC : Carbon dioxide uptake by concrete during and after service life
  
  
  
• Technical Committee : DAC
  
  
  
• Technical Committee : DCS : Data-driven concrete science
  Chair : Prof. Sandra NUNES
  
  
• Technical Committee : EAC
  
  
  
• Technical Committee : EAC : Educational Activities Committee
  
  
  
• Technical Committee : EHA : Engineered healing of asphalt concrete
  Chair : Dr. Alvaro GARCIA HERNANDEZ
  
  
• Technical Committee : FEE : Fume Emissions Evaluation for Asphalt Materials
  Chair : Prof. Johan BLOM
  
  
• Technical Committee : FHP : Predicting the frost resistance of high-performance concrete structures exposed to numerous freezing and thawing cycles
  
  
  
• Technical Committee : FRP : FRP-concrete bond in structural strengthening and rehabilitation
  Chair : Prof. Nemkumar BANTHIA
  
  
• Technical Committee : FTC : Durability and Service Life of Concrete under the Influence of Freeze-Thaw Cycles combined with Chloride Penetration
  Chair : Prof. Dr. Erik SCHLANGEN
  
  
• Technical Committee : LPC : Long term performance characteristics of fibre cement composites
  Chair : Prof. Pritpal S. MANGAT
  
  
• Technical Committee : MAE : Mechanical performance and durability assessment of earthen elements and structures
  Chair : Prof. Antonin FABBRI
  
  
• Technical Committee : MCB : Mechanical Characterisation of Bamboo
  Chair : Prof. Kent HARRIES
  
  
• Technical Committee : MCT : Multi-component transport and chemical equilibrium in cement based materials
  Chair : Dr. Björn F. JOHANNESSON
  
  
• Technical Committee : MCW : Modelling of crack initiation and propagation in wood under varying ambient conditions
  
  
  
• Technical Committee : MMS : Modelling and experimental validation of moisture state in bulk cementitious materials and at the steel-concrete interface
  Chair : Prof. Zhidong ZHANG
  
  
• Technical Committee : NDE : Non-destructive evaluation of concrete elements - Updated methods
  
  
  
• Technical Committee : OCM : On-site Corrosion Condition Assessment, Monitoring and Prediction
  Chair : Dr. Carmen ANDRADE
  
  
• Technical Committee : OFS : Optical fiber sensors for civil engineering applications
  Chair : Prof. Christopher LEUNG
  
  
• Technical Committee : PEM : Processing of earth-based materials
  Chair : Dr Emmanuel KEITA
  
  
• Technical Committee : PFS : Physical Aspects of Fracture Scaling
  Chair : Prof. Dr. Jan G. M. VAN MIER
  
  
• Technical Committee : Presidency
  
  
  
• Technical Committee : QFS : Size effect and scaling of quasibrittle fracture
  Chair : Prof. Zdenek P. BAZANT
  
  
• Technical Committee : RCC : Rolled compacted concrete for pavement applications
  Chair : Dr. Christian PAGLIA
  
  
• Technical Committee : RILEM Association
  
  
  
• Technical Committee : RILEM Youth Council
  
  
  
• Technical Committee : SDM : Scientific Metadata Management of Construction materials
  Chair : Dr Tanja MANNINGER
  
  
• Technical Committee : SHE : Self-healing concrete – Its efficiency and evaluation
  Chair : Prof. Dr. Feng XING
  
  
• Technical Committee : TAC
  
  
  
• Technical Committee : UMW : Upcycling Powder Mineral “Wastes” into Cement Matrices
  Chair : Dr. Antonis KANELLOPOULOS
  
  

Joint Committees

• JCSS : Joint Committee on Structural Safety